Amerock self-close 1/2 inch overlay hinge describes a semi-concealed face frame hinge that automatically pulls the door shut, which helps doors return to the closed position for cleaner cabinet lines and reduced door bounce on everyday use. This semi-concealed hinge design leaves part of the hinge visible while the rest sits against the face frame, giving a traditional hardware look while still protecting the frame surface. The 1/2 inch overlay rating defines how far the door covers the face frame, so matching this dimension supports consistent reveals across a run of cabinets. A flat black finish color provides a dark, uniform appearance on the hinge, which supports design projects that call for black hardware on face frame cabinets. Amerock branding and the BPR7550FB part number identify the hinge for repeat jobs where the same look and function are required.
This product is a semi-concealed face frame hinge, so part of the hinge shows while the rest sits against the frame, which suits cabinets where visible decorative hinges are desired without covering the entire frame edge. The hinge is described as screw-on, so it fastens to the cabinet and door using screw attachment, giving a straightforward mechanical connection for mounting to wood face frames. Because it is a partial wrap hinge, part of the hinge leaf wraps around the face frame edge, which adds bearing surface on the frame and helps position the door relative to the frame thickness. The self-close function is built into this hinge style, which draws the door closed at the end of its travel and helps keep doors resting against the cabinet instead of drifting partially open.
This hinge is specified as a semi-concealed face frame hinge, so it is designed for cabinets built with face frames rather than frameless box construction, aligning with common North American residential cabinet layouts. The flat black finish matches jobs where black hinges are part of the visible cabinet hardware set, such as kitchens, baths, or built-ins that coordinate black pulls and knobs. With a 1/2 inch overlay value, the hinge fits layouts where the door is intended to overlap the face frame by that amount, supporting consistent door alignment in overlay-style installations. The BPR7550FB identifier ties this hinge to Amerock Corporation, helping shops standardize on a single hinge model when they want this look and function across multiple projects or service calls.
The hinge length of 2-1/4 inches provides a predictable leaf size on the cabinet side, which helps installers space hinges vertically along door edges in a repeatable pattern from cabinet to cabinet. The 1-3/4 inch width dimension defines the overall span of the hinge leaves, aiding layout when several hinges are used on taller doors and when balancing them with door stile widths. The 3/4 inch projection figure describes how far the hinge body stands off from the mounting surface, which matters when planning door swing near corners or appliances so that the door edge does not conflict with adjacent surfaces. Because this is a partial wrap hinge, the wraparound feature locates on the edge of the face frame, supporting consistent door positioning relative to frame thickness without separate locating jigs. The self-close behavior built into the hinge assists in drawing the door tight against the cabinet at the end of travel, helping maintain even gaps and a finished appearance after repeated openings.
The hinge is a semi-concealed face frame hinge, so it is used on cabinets built with face frames where part of the hinge is visible and part rests against the frame surface.
The hinge has a 1/2 inch overlay, meaning the cabinet door is positioned to overlap the face frame by 1/2 inch, which supports consistent overlay reveals across doors.
The 3/4 inch projection specifies how far the hinge extends from the mounting surface, influencing door stand-off and clearance around nearby walls, cabinets, or appliances.
The self-close function in this hinge pulls the door shut near the end of its swing, helping doors rest closed instead of staying partly open after use.
The hinge has a flat black finish and a semi-concealed style, providing a dark visible hinge segment while leaving much of the hardware against the face frame.
The Amerock BPR7550FB part number uniquely identifies this specific 1/2 inch overlay flat black semi-concealed face frame hinge for matching replacements or repeat orders.
This Amerock self-close 1/2 inch overlay semi-concealed face frame hinge in flat black combines a defined overlay, self-closing function, and partial wrap design, giving installers a known geometry for repeatable door alignment. The 2-1/4 inch length, 1-3/4 inch width, and 3/4 inch projection provide clear dimensional guides when laying out hinge locations on new or existing face frame cabinets. For projects calling for flat black visible hinges and a 1/2 inch overlay across doors, choosing this BPR7550FB model keeps hardware selection consistent from cabinet to cabinet.
Sold In: 1 Pair