Amerock self-close 1/2 overlay hinge is a semi-concealed face frame hinge designed for cabinet doors using a 1/2 inch overlay. The self-close function pulls the door shut at the end of travel, which helps the door settle consistently against the frame. As a semi-concealed face frame hinge, most of the hardware sits out of sight while still leaving enough of the hinge visible for straightforward alignment. The hinge uses a screw-on mounting style, giving a familiar installation method for installers working with standard tools. This model is part of Amerock Corporation's semi-concealed hinge line, which keeps the hinge style consistent across related door runs. The hinge is sold in pairs, so each order covers a typical single cabinet door hinge position when using one pair per opening.
This Amerock semi-concealed face frame hinge is described as partial wrap, which means the hinge leaf wraps around part of the face frame edge for location and support. The hinge uses a screw-on method for fastening, so installation follows a straightforward drill-and-drive sequence on both the door and frame. With a projection of 3/4 inch, the hinge positions the door away from the frame by that distance at full extension, which influences the clearance between doors and adjacent cabinetry. The 1/2 inch overlay specification controls how far the door covers the face frame, which is important when matching an existing overlay layout in a kitchen or shop build.
This Amerock Corporation hinge is intended for face frame cabinets that call for a 1/2 inch overlay on the door. As a semi-concealed hinge, it suits applications where a mostly hidden hinge is preferred while still keeping a visible knuckle in oil rubbed bronze. The 2-1/4 inch hinge length and 1-3/4 inch width describe the body size, which helps during layout when spacing hinges along the door stile. With a 3/4 inch projection, the hinge controls how the door stands off from the frame when open, which can influence clearances near inside corners or adjacent walls. The oil rubbed bronze finish ties the hinge visually to matching oil rubbed bronze knobs or pulls on the same project.
The 1/2 inch overlay value on this Amerock self-close 1/2 overlay hinge sets a fixed relationship between the door edge and the face frame, which simplifies repeating the same reveal on every opening. Because the hinge is partial wrap, the frame leaf locates consistently around the face frame edge, which helps keep vertical alignment from cabinet to cabinet. The screw-on mounting style allows installers to use standard pilot drilling patterns, which supports repeat drilling jigs and predictable hinge placement across multiple doors. The self-close action helps doors end in the same closed position, which is important when running doors in a long line where misalignment would stand out. Sold in pairs, the hinge quantity aligns with typical two-hinge door layouts, which helps planning on multi-door projects.
The Amerock self-close 1/2 overlay hinge is a semi-concealed face frame hinge, so it suits cabinet constructions that use a face frame with doors overlaying the frame.
The 1/2 inch overlay on this hinge sets the door to cover the face frame by 1/2 inch, which controls the reveal and keeps door spacing uniform along the run.
The partial wrap design allows the hinge leaf to wrap partway around the face frame edge, which helps locate the hinge consistently along the frame.
The 3/4 inch projection describes how far the hinge projects the door from the frame, which affects clearances between doors, adjacent cabinets, and nearby obstacles.
The 2-1/4 inch length and 1-3/4 inch width define the hinge footprint, which helps mark out hinge locations along the door stile and frame for consistent spacing.
The oil rubbed bronze finish gives the hinge a dark tone, which visually coordinates with oil rubbed bronze knobs, pulls, and other cabinet hardware on the project.
The Amerock self-close 1/2 overlay hinge with oil rubbed bronze finish brings a semi-concealed, partial wrap design to face frame cabinet work. With defined length, width, projection, and overlay values, it gives clear layout points for consistent door reveals. The self-close function supports doors settling into the same closed position, which is valuable across a bank of cabinets. At Wurth Baer Supply, this hinge is available in pairs, making it straightforward to match quantities to typical cabinet door layouts on shop or jobsite projects.
Sold In: 1 Pair