
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock semi-concealed face frame hinge gives a 1/2 inch overlay, so the door covers half an inch of the face frame and creates a consistent reveal across a cabinet run. This hinge is self-close, so the mechanism pulls the door shut at the end of travel and helps doors sit properly without needing a separate catch. The semi-concealed face frame design leaves only part of the hinge visible, which keeps adjustment points accessible while presenting a cleaner front appearance. Being a partial wrap hinge, it wraps around the face frame edge, providing a firm grip on the frame that supports alignment over time. The satin nickel finish establishes a muted metallic look that supports satin nickel design schemes across pulls and other visible hardware. The product name identifies this hinge as screw-on, so the leaves fasten directly with screws to the frame and door in typical cabinet construction.
The stated hinge length of 2-1/4 inches describes the long dimension of the hinge leaf, which guides how much door edge and frame surface the hinge will span when positioned on a cabinet. The 1-1/2 inch width defines the shorter dimension across the hinge, which determines how much lateral space is occupied on the mounting surfaces. A projection of 1-5/16 inches indicates how far the hinge assembly stands out from the mounting plane, which influences door stand-off and clearance between the door and frame when the door swings. The 1/2 inch overlay value, combined with these dimensions, gives installers a set of concrete numbers to use when laying out hinge locations along a face frame. The satin nickel finish on these dimensions means visible edges and corners present the same finish as matching decorative hardware.
This hinge is identified as a semi-concealed face frame hinge, so it is intended for cabinets constructed with a face frame front. The partial wrap design means one leaf wraps around the face frame, so the hinge engages both the face and edge of the frame in typical cabinet layouts. The 1/2 inch overlay rating places the door so it overlaps the frame by that specific amount, which aligns with common overlay patterns used on many framed kitchen and bath cabinets. The hinge length of 2-1/4 inches and width of 1-1/2 inches define the footprint on both door and frame, which helps installers plan hinge spacing to distribute door weight over multiple hinges on a tall or wide door. Its satin nickel finish matches projects designed around satin nickel hardware, so visible hinge portions align with the rest of the cabinet metalwork.
The partial wrap construction supports alignment because the hinge wraps the face frame edge, giving a positive reference against the frame corner that helps maintain consistent door positioning across a run of cabinets. The 1/2 inch overlay value provides a clear numerical target, so installers can position each door relative to the frame for even reveals and predictable gaps between neighboring doors. With a projection of 1-5/16 inches, the hinge sets a known stand-off that influences how the door clears the frame in swing, which matters when working around moldings or adjacent doors. The self-close action helps doors land in a consistent closed position, which supports uniform lines across multiple openings. The combination of 2-1/4 inch length and 1-1/2 inch width determines how much bearing surface the hinge has on wood surfaces, which is important for distributing loads over the door and face frame contact areas in everyday cabinet use.
The hinge is described as a semi-concealed face frame hinge, so it is intended for cabinets that use a face frame front construction rather than frameless designs.
The 1/2 inch overlay means the door overlaps the face frame by half an inch, setting the reveal and helping align multiple doors to a consistent coverage pattern.
The term partial wrap indicates the hinge leaf wraps around the face frame edge, giving a firm grip on both the frame face and edge for stable mounting.
The self-close feature draws the door shut at the end of travel, helping doors rest fully closed without relying solely on user placement at every closing.
The 2-1/4 inch length and 1-1/2 inch width define the hinge footprint, guiding door and frame layout so mounting screws land on adequate wood surface.
The 1-5/16 inch projection indicates how far the hinge extends from the mounting surface, which influences door clearance and swing relative to the face frame.
The Amerock self-close 1/2 inch overlay semi-concealed face frame hinge BPR7550G10 provides a defined overlay value, partial wrap construction, and stated dimensions that support planned cabinet layouts. The satin nickel finish matches satin nickel hardware schemes where visible metal needs to coordinate. The self-close feature helps cabinet doors land in a consistent closed position across everyday use. For projects built around face frames and a 1/2 inch overlay plan, these hinge characteristics support predictable layout, stable mounting on the frame, and an appearance that fits satin nickel cabinet designs.
Sold In: 1 Pair