Amerock self-close 1/2 overlay hinge defines this semi-concealed face frame hinge as a functional part for cabinet doors where a 1/2 inch overlay is required, giving installers a clear match between hinge geometry and face frame layout. The self-close function means the hinge is designed to pull the door shut at the end of its swing, which helps doors stay closed without extra catches on everyday cabinet projects. Being a semi-concealed face frame hinge, part BPR7550CZ leaves only a small portion visible when the door is shut, which supports clean lines while still allowing straightforward alignment during installation. The screw-on design described in the product name indicates a hinge intended to be fastened with screws, which suits standard cabinet construction methods and familiar shop tooling. The champagne bronze finish called out in the description sets the visible portion of the hinge in a specific color tone, which matters when coordinating exposed hardware with other Amerock functional hardware on the job.
This Amerock semi-concealed face frame hinge is specified as a 1/2 inch overlay part, so it is engineered for cabinet doors that extend one-half inch past the edge of the face frame opening. That overlay value helps installers lay out drilling patterns and door sizing so doors line up correctly across a bank of cabinets. The screw-on designation in the product name points to a hinge that is attached using driven fasteners, fitting smoothly into cabinet shop operations that already use powered drivers and jigs. Because this hinge belongs to Amerock Corporation functional hardware, it follows a defined pattern of face frame mounting and door connection that aligns with other Amerock semi-concealed hinges in the same family.
The Amerock self-close 1/2 overlay hinge is identified for face frame cabinets where a semi-concealed hinge look is needed, so it works in layouts that mix visible style with practical mounting surfaces. As a semi-concealed face frame hinge in the Semi-Concealed Hinges product class, it belongs in situations where the cabinet structure is built with a frontal frame rather than frameless construction. The 1/2 inch overlay specification aligns with common residential and light commercial cabinet door designs that call for a moderate overlay rather than inset or full overlay layouts. Its champagne bronze finish, referenced directly in the product name, makes this hinge suitable where the exposed portion must coordinate with champagne bronze pulls, knobs, or other Amerock functional hardware on the same face frame. Because Amerock classifies this hinge in its functional hardware series, the part is oriented toward daily-use cabinet doors rather than purely decorative roles.
The web description states that every Amerock functional hardware series item is tested for durability in conditions exceeding all KCMA certification requirements, which means this hinge is exercised beyond common kitchen cabinet industry benchmarks before being offered. That level of testing supports long-term performance expectations when the hinge is used on cabinets that see frequent opening and closing. The same description notes testing beyond BHMS standards for cycle life, strength, and finish quality, so the BPR7550CZ hinge is evaluated for repeated motion, load handling, and retention of its champagne bronze finish. This testing approach matters on job sites where callbacks are costly, because components with proven cycle life and strength reduce the likelihood of hinge-related door sag or failure over time. By tying this semi-concealed cabinet hinge to both KCMA and BHMS criteria, Amerock Corporation provides a performance frame that installers can align with project specifications that call for tested functional hardware. The manufacturer part number BPR7550CZ uniquely identifies this hinge within the Amerock catalog, which simplifies reordering and matching hinges across phased builds or later cabinet additions.
The Amerock self-close 1/2 overlay hinge is specified as a semi-concealed face frame hinge, so it is suited to cabinets built with a face frame front structure.
The 1/2 inch overlay specification means the door is designed to extend one-half inch over the face frame, guiding door sizing and alignment across a cabinet run.
The self-close feature on this Amerock hinge is designed to pull the door shut at the end of its swing, helping doors settle firmly closed in regular cabinet use.
The champagne bronze designation in the Amerock BPR7550CZ name defines the visible color tone, allowing the hinge to coordinate with other champagne bronze cabinet hardware.
The product name describes a screw-on hinge, indicating it is intended to be fastened with screws in typical cabinet construction workflows.
The web description states this functional hardware series is tested beyond KCMA requirements and BHMS standards, indicating the hinge is evaluated for cycle life, strength, and finish quality.
The Amerock self-close 1/2 overlay hinge BPR7550CZ combines a semi-concealed face frame layout, 1/2 inch overlay geometry, and a champagne bronze finish under the Amerock functional hardware series testing program. For cabinet runs that call for this overlay value, face frame construction, and a champagne bronze visible portion, this hinge offers a clearly defined specification and a manufacturer part number that is easy to reference when planning or expanding cabinet installations.
Sold In: 1 Pair