Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass Maxcess is an 18 inch soft-close undermount drawer slide engineered specifically for face-frame cabinet construction, bringing concealed-slide performance and integrated soft-close to traditional American cabinetry at a production-friendly price point.
Traditional face-frame cabinetry is the home for this slide. The Maxcess face-frame version supports the slide's rear end in face-frame construction, where the cabinet side sits behind the frame rather than flush to it. That rear support is what makes the slide work correctly in this application — it is not a drop-in replacement for the frameless version of the same series, and the two are not interchangeable on the job site.
Soft-close closing behavior suits any drawer the homeowner or the end user opens repeatedly: spice drawers, pot storage, bathroom vanities, and utility base cabinets. The 75 lb dynamic rating per pair covers these loads reliably. The 7/8 extension means nearly all of the drawer's depth opens clear of the cabinet face — enough reach for almost every kitchen or bath application without stepping up to full-extension pricing.
The Maxcess runs on roller bearings between steel members finished in zinc, a combination that keeps travel quiet under load and holds up through years of indoor cycling. The concealed undermount position keeps the hardware out of sight when the drawer is open, so the interior of the cabinet shows only wood. The zinc finish is a functional indoor coating; this slide is for dry, interior cabinet work.
Cabinet shops producing face-frame kitchens and baths in volume are the core buyer. The Maxcess hits a price point between economy Euro slides and full-extension premium undermounts, making it a practical specification for builders and remodelers who want a concealed, soft-close result in traditional framed construction without the cost of Dynapro or Elite Plus. Designers specifying hardware for face-frame renovation projects will find it a straightforward match for mid-range residential work. Build the drawer box to Grass's published specification for the Maxcess series — correct nominal length, box width, drawer side thickness up to 5/8 inch, bottom recess, and rear notch — and the locking devices seat the front cleanly after the drawer is hung.
No. This is the face-frame version of the Maxcess. For frameless cabinets, select the frameless Maxcess configuration instead — the mounting geometry differs and the two versions are not interchangeable.
The Maxcess is designed for drawer sides up to 5/8 inch (16mm) thick. Build the box to Grass's specification for the series, including the correct box width formula, bottom recess, and rear notch.
75 lb per pair, dynamic — meaning that is the rated working load through repeated open-close cycles. The Maxcess also carries a higher static rating, but the 75 lb dynamic figure is the number that governs everyday use.
Almost. The Maxcess is a 7/8-extension slide with minimal extension loss — the vast majority of the drawer's depth clears the cabinet face, but the last inch or so stays inside. It is not a full-extension slide, so rear contents very close to the back of a deep drawer may be harder to reach than on a full-extension model.
Maxcess front locking devices are series-specific Grass accessories. Confirm whether they are included with this bulk SKU or need to be ordered separately before placing a production run.
For face-frame cabinet shops that want soft-close and a clean undermount look without the cost of a premium full-extension system, the 18 inch Grass Maxcess face-frame slide delivers exactly that — built to spec, built to last indoors, and ready to run.
Sold In: 200 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF02499-12 Mfr# 02499-12S | Grass America Maxcess Front Locking Device, Right Hand, Green, 02499-12S | ||||
Sold in: 1 Each |  GF02498-12 Mfr# 02498-12S | Grass America Maxcess Front Locking Device, Left Hand, Green, 02498-12S | ||||
Sold in: 1 Each |  GF02614-12 Mfr# 02500-03 | Grass America ElitePlus Front Locking Device, Left Hand/Right Hand, Green, 02500-03 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 500 Each |  GF81001 Mfr# 81001-43 | Wood Screws FHP, Nickel-Plated #6 Gauge 5/8" Length, Nickel-Plated - 500 Box Qty | ||||
Sold in: 500 Each |  MEEUROSCW Mfr# 499.360.61.1015 | #6.3 x 11mm Euro Screw, Pozi Drive Euro Thread and Blunt Point, Nickel, Box of 500 by Grass |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  ME7950.VE300 Mfr# 7950.VE300 | Grass America Rear Mounting Bracket, 7950.VE300 |
