
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Spiral pull 224mm polished chrome describes a handle from the R. Christensen by Berenson Spiral collection that mounts on cabinet fronts using an 8-13/16 inch center to center hole spacing, so it lines up with common drill patterns on many cabinet layouts. The pull is made from zinc with a polished chrome finish, which creates a bright metal look while using a sturdy base material suitable for decorative hardware. Its overall length is 9-3/16 inches, giving a substantial gripping area across wider drawer fronts or cabinet doors. A 1 inch projection sets the hand grip away from the surface, which provides finger clearance during opening and closing. The 3/4 inch width creates a balanced feel in the hand while maintaining a streamlined profile across the face of cabinets.
The 8-13/16 inch center to center measurement defines the distance between mounting points, which matters when matching existing cabinet holes or laying out new drilling patterns for straight, even rows of pulls. The 9-3/16 inch overall length means the handle extends slightly beyond the mounting span, which creates a defined end point on each side that can align visually with cabinet rails or drawer edges. A 1 inch projection sets the gripping area out from the door or drawer front, which helps keep knuckles away from the surface while pulling. The 3/4 inch width influences the footprint across the face, which contributes to both the look and the feel of the pull during everyday cabinet operation.
This R. Christensen by Berenson Spiral Series pull with 8-13/16 inch center to center spacing fits projects that require a longer handle across cabinet faces, because its 9-3/16 inch overall length suits wider drawers and taller doors. The polished chrome finish works in spaces that already feature polished chrome decorative hardware, since keeping the same finish across pulls, hinges, and plumbing fixtures supports a unified look. The zinc material suits interior cabinet installations, as it is a common base metal in decorative hardware that handles typical residential and light commercial cabinet use. The 1 inch projection is helpful on doors or drawers near surrounding trim, because it brings the hand grip forward from the cabinet plane for clearance around adjacent surfaces.
The defined 8-13/16 inch center to center dimension on the 1140-1026-P cabinet pull allows repeated drilling at the same spacing along a run of cabinets, which supports straight alignment and reduces layout variation from door to door. The 9-3/16 inch overall length provides a predictable edge-to-edge measurement, which simplifies positioning the pull a consistent distance from cabinet edges in production or remodel work. The 3/4 inch width gives a repeatable reveal of hardware across fronts, which helps create uniform sightlines when multiple pulls are installed in rows or stacked on tall cabinets. The 1 inch projection controls how far the pull stands off the surface, which keeps the working clearance consistent across an entire kitchen, bath, or office install using this Spiral Series design.
The Spiral Series pull has an 8-13/16 inch center to center dimension, which sets the hole spacing for mounting on cabinet doors or drawers.
The 1140-1026-P cabinet pull measures 9-3/16 inches in overall length, which suits wider cabinet fronts needing a longer handle span.
The Spiral pull is made from zinc with a polished chrome finish, which pairs a solid base material with a bright decorative surface.
The pull projects 1 inch from the cabinet surface, which provides finger clearance behind the handle when opening doors or drawers.
The R. Christensen Spiral Series pull has a 3/4 inch width, which affects the visual footprint and the gripping surface across the cabinet face.
This handle is from the R. Christensen by Berenson Spiral collection, which identifies its style family within the decorative hardware line.
The R. Christensen by Berenson Spiral Series 1140-1026-P pull combines zinc construction, polished chrome finish, and 8-13/16 inch center to center spacing, which suits cabinet runs needing a longer 9-3/16 inch handle. Matching its dimensions and finish across your layout helps create consistent hardware lines on doors and drawers.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | BQ1144-1BPN-P Mfr# 1144-1BPN-P | Berenson-R.Christensen Spiral 12-5/8" (320 mm) Center to Center Brushed Nickel Pull, 1144-1BPN-P | ||||
Sold in: 1 Each | BQ1143-1BPN-P Mfr# 1143-1BPN-P | Berenson-R.Christensen Spiral 8-13/16" (224 mm) Center to Center Brushed Nickel Pull, 1143-1BPN-P | ||||
Sold in: 1 Each | BQ1142-1BPN-P Mfr# 1142-1BPN-P | Berenson-R.Christensen Spiral 6-5/16" (160 mm) Center to Center Brushed Nickel Pull, 1142-1BPN-P | ||||
Sold in: 1 Each | BQ1141-1026-P Mfr# 1141-1026-P | Berenson-R.Christensen Spiral 12-5/8" (320 mm) Center to Center Polished Chrome Pull, 1141-1026-P | ||||
Sold in: 1 Each | BQ1139-1026-P Mfr# 1139-1026-P | Berenson-R.Christensen Spiral 6-5/16" (160 mm) Center to Center Polished Chrome Pull, 1139-1026-P |