Berenson-R.Christensen Spiral 6-5/16" (160 mm) Center to Center Brushed Nickel Pull, 1142-1BPN-P

Spiral Series Brushed Nickel Pull For Cabinets

Spiral Series brushed nickel pull is a zinc cabinet handle from R. Christensen by Berenson that provides a consistent Spiral collection look across doors and drawers. The 6-5/16 inch center to center dimension sets a clear drilling layout, which supports uniform handle spacing on multiple fronts. Brushed nickel finish creates a subdued metallic appearance, which helps the pull blend with many contemporary hinges and appliance finishes in the same tone family. The zinc material gives the pull a solid, cast feel in the hand, which supports daily cabinet use in kitchens, baths, or built-ins. A total length of 6-11/16 inches creates a generous gripping area around the 6-5/16 inch mounting span, which helps when operating larger fronts. The 1142-1BPN-P part number ties this specific size and finish to the Spiral collection, which simplifies reordering for future projects.

Key Spiral Pull Details That Support Jobs

• The 6-5/16 inch center to center spacing defines exact hole locations, which simplifies jig setup and speeds repetitive cabinet drilling on runs of doors and drawers.
• The 1 inch projection establishes how far the pull stands off the face, which helps installers anticipate clearance around door reveals and nearby trim.
• The 3/4 inch width sets the front profile of the grip, which informs how the handle will look across narrow rails or wider drawer fronts.
• The brushed nickel finish delivers a consistent color tone, which supports visual alignment with other brushed nickel decorative hardware on the project.
• The zinc construction provides a solid-feeling handle body, which supports regular opening and closing motions on frequently used cabinet fronts.
• The 8-32 x 1 inch screw size specification matches common cabinet drilling practice, which helps align this pull with standard door and drawer thicknesses.

Mounting Dimensions And Fit For This Pull

The 160 mm center to center measurement, listed as 6-5/16 inches, defines the mounting pattern for this Spiral Series pull, which lets installers align it with metric or imperial layout tools on site. The 6-11/16 inch overall length shows how much real estate the handle occupies on the face, which guides positioning on narrower doors versus wide drawers. A 1 inch projection sets the standoff distance from the cabinet surface, which supports finger clearance without pushing the handle too far into adjacent openings. The 3/4 inch width shapes the visible bar across the front, which affects how bold or subtle the pull appears on different stile and rail dimensions.

Using Spiral Brushed Nickel Pulls In Projects

Where This Spiral Series Pull Works Well

The Spiral Series brushed nickel pull from R. Christensen by Berenson is suited to cabinet applications that call for a coordinated collection look, because the Spiral designation ties this handle into a named family. The 6-5/16 inch center to center span fits layouts designed around this mid-size pull length, which works on both standard wall cabinets and many base cabinet drawers. The 6-11/16 inch overall length gives enough visual weight for wider drawer fronts, which helps the handle stay proportional to 3-drawer base stacks. Brushed nickel finish allows the pull to complement similar toned faucets and appliances, which is useful when tying together a full room hardware palette. The zinc material supports consistent casting of the spiral form, which helps maintain the same profile across multiple pulls on a long cabinet run.

Details That Support Consistent Results On Installs

The specified 160 mm center to center dimension lets installers use metric templates or jigs, which can speed marking when working from European-style layouts. Listing the same span as 6-5/16 inches also suits imperial-only shops, which helps maintain accuracy when swapping between tape measures and pre-set drilling guides. A 1 inch projection sets a predictable reach off the door or drawer face, which reduces guesswork about knuckle clearance behind the pull. The 3/4 inch width defines how much surface the hand contacts, which can affect comfort when operating heavier drawers in everyday use. The 8-32 x 1 inch screw size specification indicates the thread and length intended to engage typical cabinet front thicknesses, which supports a secure connection through standard door and drawer materials. The 1142-1BPN-P manufacturer part number clearly identifies this exact size, finish, and style, which reduces ordering errors when matching existing Spiral Series installations.

Common Questions About The Spiral Series Pull

Selecting This Spiral Pull For Your Next Job

The Spiral Series brushed nickel pull with 6-5/16 inch center to center spacing, 6-11/16 inch length, and 1 inch projection offers defined mounting dimensions for cabinet layouts. The zinc construction and brushed nickel finish from R. Christensen by Berenson give a consistent Spiral collection look. Using the 1142-1BPN-P part number and 160 mm center to center spec allows straightforward planning and ordering for new installations or matching existing Spiral hardware on future projects.