Berenson-R.Christensen Spiral 12-5/8" (320 mm) Center to Center Brushed Nickel Pull, 1144-1BPN-P

Brushed Nickel Cabinet Pull For Consistent Runs

Brushed Nickel Cabinet Pull describes this R. Christensen by Berenson Spiral Series handle that uses a brushed nickel finish on zinc material to deliver a consistent look across cabinet and furniture projects. The pull has a 12-5/8 inch (320 mm) center to center size, which sets the hole spacing you drill and keeps alignment predictable from door to door. Its 13-3/8 inch overall length gives you a substantial handgrip, useful on wider drawers or taller doors where users expect a solid grab point. A 1 inch projection sets how far the pull stands off the face, which influences clearance for fingers and avoids knuckles dragging along the surface. The 3/4 inch width determines the front profile, affecting both appearance and how the pull feels in the hand during daily use.

Spiral Series Pull Details That Help Your Layout

• The 12-5/8 inch (320 mm) center to center dimension sets exact hole spacing, so jigs and drilling templates can be reused across multiple fronts without layout changes.
• The 13-3/8 inch length or diameter measurement defines the full span of the pull, helping you balance handle size with door or drawer width on banks of cabinets.
• The 1 inch projection controls stand-off from the face, affecting user clearance and reducing the chance of contact with the door or drawer surface during operation.
• The 3/4 inch width shapes the front profile, which influences both grip comfort and how the pull visually lines up with adjacent hardware on the project.
• The brushed nickel finish over zinc material sets the color tone, helping this Spiral Series pull coordinate with other brushed nickel decorative hardware in the same space.

Mounting Dimensions For Straightforward Installation

The 320 mm (12-5/8 inch) center to center mounting dimension on this Spiral Series pull dictates where you drill through the cabinet face, which keeps every handle in the run lined up on a consistent grid. Its 1 inch projection determines how far off the surface the handgrip sits, affecting both drilling depth decisions and how the pull clears door and drawer front profiles. With a 3/4 inch width, the pull has a defined footprint on the face, which matters when you lay out spacing near panel edges, stile intersections, or neighboring pulls. The 13-3/8 inch overall length also helps you position the ends relative to panel joints, glass lites, or decorative moldings without crowding those details.

Why This R. Christensen Spiral Pull Fits Real Jobs

Where The 320mm Spiral Series Pull Works Best

This R. Christensen by Berenson Spiral Series pull, with a 12-5/8 inch (320 mm) center to center dimension, suits cabinet and furniture applications that use longer handles for visual balance and leverage. The extended 13-3/8 inch length gives proportion on wider drawers, tall pantry doors, or wardrobe fronts where small pulls would look undersized. Its 1 inch projection keeps the gripping area away from the face of the door or drawer, helping users grab from above, below, or the side without fingers rubbing painted, laminated, or veneered surfaces during use. The 3/4 inch width provides a defined visual line on the front, which can align with rail heights or panel reveals in built-ins and kitchen runs. The brushed nickel finish works within designs that call for a subdued metallic tone, coordinating with other brushed nickel decorative hardware and fittings in the project.

How Dimensions And Finish Support Repeatable Results

The 320 mm center to center dimension on this zinc brushed nickel handle lets installers and woodworkers standardize drilling patterns, which supports the use of jigs for faster production and consistent reveals across multiple openings. Its 13-3/8 inch overall length makes it easier to set a uniform offset from door or drawer ends, because you are working with a clearly defined span instead of estimating reach. The 1 inch projection provides a known stand-off, which can be accounted for when designing overlay depths or when planning clearances near walls, adjacent cabinets, or appliance fronts. With a 3/4 inch width, the pull covers a predictable band of the surface, helping you plan for any edge profiles or applied moldings so the hardware neither crowds nor floats away from those features. The brushed nickel finish on zinc keeps the color and sheen in a specific range, making it simpler to coordinate this Spiral Series pull with other brushed nickel pieces on the same job.

Practical Questions About This Spiral Series Pull

Select This Pull For Brushed Nickel Runs

This R. Christensen by Berenson Spiral Series zinc brushed nickel handle, with its 12-5/8 inch (320 mm) center to center and 13-3/8 inch overall length, gives you a defined size for layouts that call for longer pulls. The 1 inch projection and 3/4 inch width establish a predictable footprint on doors and drawers, so you can plan drilling patterns and visual alignment confidently across a full cabinet or furniture project.