Berenson-R.Christensen Spiral 12-5/8" (320 mm) Center to Center Polished Chrome Pull, 1141-1026-P

Spiral Series Polished Chrome Cabinet Pull Use

Spiral Series polished chrome pull from R. Christensen by Berenson is a zinc cabinet handle designed for decorative hardware projects. The pull has a center to center measurement of 12-5/8 inches, so hole spacing aligns with 320 mm layouts on longer cabinet doors or wide drawer fronts. The overall length of 13-3/8 inches gives a substantial grip area across the fascia, which helps when opening heavier fronts. A projection of 1 inch sets the hand clearance from the surface, so the pull stands off enough for fingers while staying tight to the face for a clean line. The width of 3/4 inch creates a narrow profile across the stile or rail, which supports a streamlined look on modern or transitional cabinetry. The polished chrome finish provides a bright metallic surface, so it coordinates with other chrome decorative hardware in the same space.

Key Spiral Series Pull Details For Projects

• The Spiral Series collection designation ties this pull to matching decorative hardware, which matters when a project needs consistent style across doors and drawers.
• Zinc material forms the body of the pull, which provides a solid metal base for the polished chrome finish during cabinet use.
• The polished chrome finish creates a reflective surface, which is useful when the installer wants the pull to visually tie into other chrome components in the room.
• The center to center size of 12-5/8 inches supports layouts that use 320 mm drilling patterns, which simplifies planning when working with metric or mixed-dimension cabinets.
• The projection of 1 inch defines how far the pull stands off the cabinet face, which influences finger clearance and how far the hardware extends into the working area.
• The 3/4 inch width sets the visible band across the front, which affects how the pull reads against narrow rails or wider slab drawer fronts.

Installation Layout And Mounting Dimensions

The Spiral Series pull uses a 12-5/8 inch center to center dimension, so installers can mark mounting points knowing the distance matches 320 mm hole spacing. This center to center size fits longer drawer fronts or tall doors where a wider hand spread is preferred. With an overall length of 13-3/8 inches, the pull extends slightly beyond the mounting points at each end, which helps center the grip over the drilled holes. The 1 inch projection establishes the stand-off from the cabinet surface, so the handle does not protrude excessively into walkways while still allowing an easy grab. At 3/4 inch width, the pull occupies a modest band of space on the face, which helps with placement on face-frame stiles or narrow drawer rails where visual balance matters.

Using This 320 mm Center To Center Pull

Where This R. Christensen Spiral Pull Fits

The R. Christensen by Berenson Spiral Series pull with 12-5/8 inch center to center spacing fits cabinet layouts that call for a 320 mm spread between mounting holes. This sizing works well on wide drawers or doors where a longer pull supports better leverage. The overall length of 13-3/8 inches lets the handle span a larger portion of the front, which helps balance tall pantry doors or oversized drawer faces. A 1 inch projection positions the gripping surface slightly off the face, which is useful in kitchens, baths, or shop cabinets where hands approach from different angles. With a width of 3/4 inch, the pull maintains a slim front view, so it suits modern fronts that rely on linear hardware. The polished chrome finish aligns with chrome decorative hardware schemes, helping the pull visually integrate with hinges, faucets, or other chrome elements.

Details That Support Consistent Cabinet Results

The 12-5/8 inch center to center measurement connects directly to a 320 mm drilling pattern, which supports repeatable layouts across multiple fronts during large runs of cabinetry. Because the overall length is 13-3/8 inches, installers can position the pull so its ends consistently frame the drilled holes, creating a uniform appearance from cabinet to cabinet. The 1 inch projection defines how far the pull extends into the room, which aids in planning clearances near adjacent doors or appliances. A 3/4 inch width keeps the hardware visually controlled on narrow stiles, which helps maintain margin from edges and reduces visual crowding on smaller fronts. The zinc construction beneath the polished chrome finish establishes a metal core, which supports the handle under regular door and drawer operation. As part of the Spiral collection, this pull can be selected alongside other Spiral pieces so the project maintains a single design language across all installed hardware.

Common Questions About The Spiral Series Pull

Selecting This Spiral Pull For Your Project

The Spiral Series polished chrome pull with 12-5/8 inch center to center sizing, 13-3/8 inch overall length, and 1 inch projection offers defined dimensions for cabinet layouts. When a project calls for zinc construction with a polished chrome finish in the Spiral collection, this R. Christensen by Berenson 1141-1026-P pull gives a clear option that aligns hole spacing, visual proportion, and finish across doors and drawers.