Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 100 Silentia hinge brings soft-close performance to 1/2 inch overlay doors on face-frame and frameless cabinets, mounted with press-in dowels for a clean, screw-free installation in the door.
The 1/2 inch overlay is the practical choice whenever two doors meet on a single center partition, each covering half the panel so neither arm crowds the other. It also suits cabinet runs where a modest overlay is the design intent. The 35mm cup bores into the back of the door, and the dowel attachment presses the hinge into pre-bored dowel holes without cup screws, which speeds installation on CNC-bored doors and keeps the door face clean. The hinge arm then connects to a Salice base plate mounted to the cabinet side or frame. That plate is a separate purchase, and it must be a Salice plate: plates are brand-specific and another brand's plate will not engage this arm correctly.
The hinge body is plated steel, and the nickel finish gives it a neutral, slightly warm tone that sits comfortably alongside other nickel pulls, knobs, or slide hardware on the same cabinet run. Silentia soft-close is integrated into the hinge, so no separate damper clip is needed and there are no loose parts to lose on a production line. The side and height adjustment in the arm lets you square up doors and set an even reveal after the cabinet is installed, without touching the plate position.
This hinge suits cabinet shops running CNC-bored doors, where the dowel mount drops straight into the existing hole pattern without a screwdriver at the cup. It is equally useful on renovation projects fitting partial-overlay doors to older face-frame boxes, or on new frameless construction where two doors share a partition and a full-overlay hinge would cause the arms to interfere. For doors in the standard 16 to 22mm thickness range, this is the Salice Series 100 choice when the job calls for a quiet, damped close with nickel hardware and a partial overlay. If a door is thicker than 22mm, a thick-door hinge is the right move instead.
This is a soft-close hinge. Silentia is Salice's integrated damping system, which slows the door over the last few degrees so it does not slam shut. A self-close hinge uses a spring to pull the door closed, with no cushioning. If you want the quiet, controlled close, this is the one.
Yes. The hinge arm clips to a Salice base plate that mounts to the cabinet side or face-frame stile, and that plate is sold separately. Plates are brand-specific, so use a Salice plate matched to your cabinet construction and the overlay position you need.
Instead of cup screws, the hinge uses pre-mounted dowels that press into matching holes bored into the door. For CNC-bored doors with the dowel holes already in place, this speeds up installation and leaves no screw heads visible inside the bore. If your doors are screw-bored rather than dowel-bored, check the screw-mount version of this hinge.
Yes, this hinge works on both, depending on which Salice base plate you pair it with. Use a face-frame plate for frame-front boxes and a frameless plate for panel-front boxes. The hinge body is the same either way.
Specify this hinge when the job calls for 1/2 inch overlay doors that close quietly, mount fast with dowels, and finish in a clean nickel that ties into the rest of the hardware.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3000 Each |  UBS2XX85H9 Mfr# S2XX85H9 | Flange Cover Cap, Nickel | ||||
Sold in: 1 Each |  UBS2XX86BT Mfr# S2XX86BT | Silentia Hinge Spacers 0.6mm Height For Silentia 110 Deg Hinges | ||||
Sold in: 1 Each |  UBS2XX86AT Mfr# S2XX86AT | 1.2mm Spacer for Silentia Series Hinges | ||||
Sold in: 1 Each |  UBS2XX86KT Mfr# S2XX86KT | Silentia Hinge Spacers 1.8mm Height For Silentia 110 Deg Hinges | ||||
Sold in: 1 Each |  UBD1A6ACGSN Mfr# D9A6AC3SN | Silentia Hinge Cup Depth Gauge 12 mm | ||||
Sold in: 1 Each |  UBD2ABACGSN Mfr# D2ABACGSN | Silentia Hinge Cup Depth Gauge 15.5 mm | ||||
Sold in: 1 Each |  UBS1E637XY Mfr# S1E637XY | Salice Series 100 & 700 Hinge Stop Device S1E637XY |