center support for 1-5/16 aluminum closet rod chrome is a Pro Value Series support designed for 1-5/16 inch diameter round tubing, so it directly matches standard aluminum closet rod sizing in many closet layouts. The support is specified for Pro Value Series aluminum tubing Part# UF53431-46-015 in 8 foot length or UF53431-46-014 in 12 foot length, keeping rod and support coordination straightforward on longer spans. The piece has a chrome finish, giving the visible support a consistent look with chrome closet tubing in open or reach-in closets. The product is identified under Manufacturer Part# 54233 46 105, helping installers align it with drawings and ordering systems when planning rod runs or matching previous jobs.
The center support uses two mounting holes spaced 1-1/2 inches center-to-center, giving installers a fixed layout for marking and drilling into closet panels or supports. Using #6 x 3/4 inch screws at these holes sets expectations for pilot sizing and engagement depth in common substrates. The fit for 1-5/16 inch diameter round tubing means the support contacts the rod correctly, which helps the aluminum tubing track straight across 8 foot or 12 foot spans referenced by the specified part numbers. With a chrome finish matching chrome closet rods, the mounted support blends into rod runs while carrying the load at intermediate points.
This Pro Value Series center support is defined for 1-5/16 inch diameter round tubing, aligning directly with Pro Value Series aluminum closet rod Part# UF53431-46-015 in 8 foot length and UF53431-46-014 in 12 foot length. That sizing makes it suitable wherever those aluminum rods are specified, from single long hanging sections to multi-bay closet runs that share continuous tubing. The 1-5/16 inch diameter reference keeps the support tied to a specific rod profile, which matters when coordinating shop drawings or repeating a standard closet layout across several units or rooms.
The chrome finish allows the support to sit visibly under the rod without breaking the line of chrome tubing, so it works well in open-plan closets and wardrobe installations where hardware is in direct view. The Manufacturer Part# 54233 46 105 gives a consistent identifier for spec sheets, pull lists, and reorders, helping maintain the same support style on future phases of a project. Because the support references both the tubing diameter and matching aluminum rod part numbers, it fits into a defined closet hardware system rather than acting as a generic component.
The two mounting holes with 1-1/2 inch center-to-center spacing create a stable footprint on the wall or panel, which helps the support resist rotation and keeps the 1-5/16 inch rod seated in line. Using #6 x 3/4 inch screws gives each hole a known fastener size, assisting in achieving consistent bite into substrates across multiple supports on a long run. When paired with the specified 8 foot and 12 foot aluminum rods, this defined mounting pattern helps maintain uniform support intervals, which contributes to straighter rod lines over longer spans.
The support cradle is designed for 1-5/16 inch diameter round tubing, so the rod sits in a defined seat instead of a loose opening, helping reduce play where multiple supports share load. Matching chrome finish between the support and chrome rods keeps the hardware alignment visually clean, which is important when rods and supports repeat across several closet elevations. With the Pro Value Series naming and Manufacturer Part# 54233 46 105, trades can tie the center support to the same hardware family as the specified rods, reducing variation in field-installed components.
The center support is made for 1-5/16 inch diameter round tubing, so it fits that specific rod size and holds the aluminum closet rod in a correctly sized saddle.
The support is specified for aluminum closet rods Part# UF53431-46-015 in 8 foot length and UF53431-46-014 in 12 foot length, keeping rod and support selection aligned.
The center support mounts through two holes spaced 1-1/2 inches center-to-center, giving a fixed pattern for placing screws on a wall or closet panel.
The support uses #6 x 3/4 inch screws at the two mounting holes, so fastener gauge and length are defined for fastening into typical closet substrates.
The center support has a chrome finish, so it aligns visually with chrome closet rods and other chrome closet hardware in the same installation.
The product is identified as Pro Value Series Manufacturer Part# 54233 46 105, which ties it to the same hardware line as the referenced aluminum rods.
This Pro Value Series center support for 1-5/16 inch diameter round tubing ties directly to aluminum closet rods UF53431-46-015 and UF53431-46-014, so rod and support pairing stays consistent across projects. With a chrome finish, defined 1-1/2 inch center-to-center mounting holes, and #6 x 3/4 inch screws, it offers clear parameters for layout and fastening. Using Manufacturer Part# 54233 46 105 during planning or reorders keeps this same center support in future closet runs.
Sold In: 1 Each