Closet rod center support anchors 1-5/16 inch diameter aluminum round tubing along a span so the rod stays aligned under hanging load. This part, from the Pro Value Series line, functions as a fixed support point for a continuous closet rod. The center support is designed specifically for 1-5/16 inch diameter aluminum round tubing, so the saddle geometry matches the tube profile and keeps the rod seated. The oil rubbed bronze finish delivers a dark, uniform appearance that visually ties in with other oil rubbed bronze closet rods and flanges in the same space. By using a dedicated center support matched to the tube diameter, installers can keep long aluminum closet rods straighter and reduce flex at the midpoint. The Pro Value Series identity signals that this support coordinates with other closet rods and flanges in the same product class for consistent layouts.
This center support for round tubing uses two mounting screw holes set at a 1-1/2 inch center-to-center spacing, so installers can lay out holes precisely when fastening to a wall, cleat, or shelf underside. The dual-hole pattern spreads the load into the mounting surface, which helps the 1-5/16 inch diameter aluminum round tubing stay stable in typical closet use. Because the support is dimensioned around 1-5/16 inch diameter tubing, it locates the rod consistently along the run, helping keep hangers at a uniform height. The oil rubbed bronze finish also plays a role during layout in visible locations, since the finish is intended to match other oil rubbed bronze closet components in the same assembly.
This Pro Value Series center support is specified for 1-5/16 inch diameter aluminum round tubing, so it is suited to closet, shelf, and garage organization runs built with that tubing size. Within the Shelf, Closet & Garage Organization category and Closet Tubing & Flanges segment, it acts as the intermediate support between end flanges on a rod run. The Closet Rods & Flanges product class designation confirms its role in supporting and positioning closet rods as part of a coordinated system. In practice, the support installs along the span to carry the rod at a fixed elevation, so hanging garments or stored items remain level relative to shelves and adjacent rods. The oil rubbed bronze finish aligns the part visually with other oil rubbed bronze hardware in the same installation zone.
The 1-5/16 inch diameter specification ties the support directly to standard aluminum round tubing used in many closet layouts, which helps installers avoid mismatch between rod size and support cradle. When the tubing matches that diameter, the rod bears along the intended contact area of the support, which promotes a straighter rod line under everyday hanging loads. The two mounting screw holes integrated in the design create a fixed, repeatable fastening pattern, so multiple supports along a wall can be referenced from a consistent 1-1/2 inch center-to-center hole spacing. This consistent spacing aids in snapping lines or using templates across a project. The oil rubbed bronze finish on the support contributes to a uniform appearance when paired with oil rubbed bronze closet tubing and flanges, helping finished projects present as a cohesive hardware set.
The center support is designed for 1-5/16 inch diameter aluminum round tubing, which means the saddle profile matches that tube size for proper seating.
The center support uses two mounting screw holes with a 1-1/2 inch center-to-center spacing, providing a defined pattern for fastening to a wall or other backing.
The support has an oil rubbed bronze finish, so it visually coordinates with oil rubbed bronze closet rods and flanges in the same installation.
The product is part of the Pro Value Series and classified under Closet Rods & Flanges, positioning it as a matching closet hardware component.
The center support sits along the span between end flanges on a 1-5/16 inch aluminum round tube, helping carry the rod and limit deflection in the middle.
The 1-1/2 inch C/C dimension states the distance between the centers of the two mounting screw holes, guiding hole layout during installation.
This center support for round tubing is configured around 1-5/16 inch diameter aluminum closet rods, so it ties directly into that tubing size on your layout. The two-hole mounting pattern with 1-1/2 inch center-to-center spacing simplifies drilling and alignment, especially when repeating supports on a long wall. With its oil rubbed bronze finish and Closet Rods & Flanges classification, it visually and functionally coordinates with other closet hardware in the same Pro Value Series family. For projects built around 1-5/16 inch aluminum tubing in an oil rubbed bronze scheme, this support provides a matching intermediate support point.
Sold In: 1 Each