closet rod center support 1-5/16 is a Pro Value Series center support designed for 1-5/16 inch diameter aluminum round tubing, so it carries standard closet rods that match this diameter across the span. This center support belongs to the Closet Rods and Flanges product class, meaning it works as part of a closet tubing and flange system where the rod needs mid-span bearing. The support is identified by manufacturer part number 54233 48 099, which helps match it with existing layouts or repeat orders on multi-closet jobs. It is offered in dull brass, dull chrome, dull nickel, matte black, and oil rubbed bronze finishes, so the support can visually blend with rods and nearby closet hardware. This flexibility in finish helps maintain a consistent appearance in open-closet or wardrobe installs where the hardware remains visible.
This center support is drilled with two mounting holes, so the load from the 1-5/16 inch aluminum round tubing is shared between two fastener points for better stability on the substrate. The holes are laid out at 1-1/2 inches center to center, which gives a predictable template when laying out multiple supports along a closet run. Because the support is sized specifically for 1-5/16 inch diameter aluminum round tubing, the rod seats properly inside the support profile, helping maintain a level hanging line along the length of the closet. This combination of fixed diameter fit and defined hole spacing gives installers a repeatable setup when aligning supports in a straight line.
The Pro Value Series center support is engineered for 1-5/16 inch diameter aluminum round tubing, so it matches the outside diameter of standard aluminum closet rods in that size. When the rod rests in the support, the diameter match helps control side-to-side movement, which is important for keeping hangers running parallel to neighboring sections. Because the part is classified under Shelf, Closet and Garage Organization in the Closet Tubing and Flanges category, it fits naturally into systems where long spans of aluminum tubing are used for hanging storage. On multi-bay closet walls, placing this center support at strategic points under a 1-5/16 inch aluminum rod distributes the rod load to the mounting surface, which helps the system carry everyday hanging weight. The availability of finishes such as dull brass, dull chrome, dull nickel, matte black, and oil rubbed bronze allows the support to be chosen to match rods and nearby closet trim pieces, keeping the visual lines consistent in open storage runs.
The center support uses two mounting holes, so each support is anchored at two spots, which resists rotation when the rod is loaded or bumped during use. With the holes positioned 1-1/2 inches center to center, installers can transfer this measurement directly to the substrate, helping place every support at identical spacing for a clean visual layout. The web description specifies that the part uses #6 x 3/4 inch screws, so the fastener diameter and length are aligned to the hole sizing and typical closet wall backings. This detail matters on repetitive installs because it standardizes the bit size and driving depth used across supports on a project. The defined 1-5/16 inch diameter aluminum round tubing fit reduces guesswork around rod selection, so the same tubing dimension can be carried through an entire closet or series of closets without re-measuring the interface each time.
This center support is for 1-5/16 inch diameter aluminum round tubing, so it fits rods with that outside diameter and holds them in position along the closet span.
The center support mounts using two holes for screws, so it fastens to the substrate at two points to stabilize the 1-5/16 inch aluminum rod.
The mounting holes are 1-1/2 inches center to center, which provides a fixed spacing reference when marking and drilling for multiple supports.
The web description specifies #6 x 3/4 inch screws, so that screw size matches the designed hole and typical closet installation substrates.
Available finishes are dull brass, dull chrome, dull nickel, matte black, and oil rubbed bronze, so the support appearance can align with surrounding closet hardware.
The manufacturer part number 54233 48 099 uniquely identifies this 1-5/16 inch center support, so reorder and matching with project specs stay straightforward.
The Pro Value Series 54233 48 099 center support is built specifically for 1-5/16 inch diameter aluminum round tubing, so it fits established closet rod standards and keeps the rod aligned across the span. With two mounting holes spaced 1-1/2 inches center to center and sized for #6 x 3/4 inch screws, layout and fastening follow a consistent pattern on every bay. Multiple finish options, from dull chrome to matte black, let the support match the chosen closet rod and nearby hardware. For projects using 1-5/16 inch aluminum closet tubing, this center support provides a defined way to support the rod at mid-span while maintaining a coordinated appearance.
Sold In: 1 Each