Hickory Hardware Bar Pull brings a modern, straight-bar grip to cabinet doors and drawers so you get a clean, contemporary look across the run. This Belwith Keeler pull uses a 7-9/16 inch (192 mm) center to center layout, which spaces the mounting holes for longer cabinet fronts where a wider pull feels proportional and solid in the hand. The pull length of 10 inches extends past the hole pattern, giving fingers extra clearance at both ends and helping larger hands get a stable grip. A projection of 1-1/4 inches stands the bar off the face of the cabinet, so fingers can wrap behind the pull without rubbing the door surface. The 1/2 inch width keeps the bar visually light while still providing a defined edge to grab.
The 7-9/16 inch (192 mm) center to center spacing on this Hickory Hardware Bar Pull sets the exact distance between mounting holes, which is the critical drilling reference for installers laying out new cabinet fronts. With an overall length of 10 inches, the bar extends beyond the mounting points, so once holes are drilled to that 192 mm pattern, the pull automatically centers across the span for a predictable fit. The 1-1/4 inch projection defines how far the pull stands off the face, which tells cabinet builders how the handle will clear door profiles and adjacent tall panels. A 1/2 inch width shows how much bar remains on view after installation, which affects both the shadow line on the cabinet face and the feel of the grip.
This stainless steel finish Hickory Hardware Bar Pull works on cabinet doors and drawers that can use a 7-9/16 inch (192 mm) center to center pattern, so it suits wider fronts where a longer pull looks appropriate. The 10 inch overall length stretches across more of the panel face, which suits base cabinets and larger upper doors where a short handle could look undersized. A projection of 1-1/4 inches keeps the gripping bar clear of recessed panels or light edge profiles, so the handle can sit over simple shaker or slab faces without interfering with the door surface. The slim 1/2 inch width keeps the hardware visually controlled on banks of drawers, which helps installers maintain a consistent modern line when several pulls are mounted in a grid.
The 192 mm center to center dimension on this Belwith Keeler bar pull ties directly to drilling jigs and layout templates that support metric hole spacing, which helps installers repeat the same pattern across a full room of cabinets. Because the overall length is 10 inches, the pull overhangs both sides of the mounting holes by a predictable amount, which simplifies alignment to door edges or drawer centers during layout. The 1-1/4 inch projection sets a known stand-off distance, so planners can account for how far the handle will extend into walkways or against adjacent tall cabinets. With a 1/2 inch width, the bar presents a consistent edge to grab, which keeps the user experience similar from one cabinet to the next when the same model is used across multiple banks. The steel material forms a single, solid pull body, which maintains its feel across repeated openings in everyday cabinet use.
This Hickory Hardware Bar Pull has a 7-9/16 inch (192 mm) center to center dimension, which sets the hole spacing installers use when drilling cabinet doors and drawers for this handle.
The HH075597-SS stainless steel cabinet pull measures 10 inches in overall length, which lets it span wider drawer fronts and larger doors for a more proportional appearance.
This 7-9/16 inch bar pull projects 1-1/4 inches from the cabinet surface, providing finger clearance behind the bar and helping protect the door finish from frequent hand contact.
The Belwith Keeler bar pull is made from steel, giving the handle body a solid feel for repeated cabinet door and drawer use in residential installations.
This steel cabinet handle uses a stainless steel finish, which visually coordinates with stainless appliances and other stainless hardware in the same room.
The HH075597-SS bar pull is produced under the Hickory Hardware brand by Belwith Keeler, which identifies it within the Bar Pull Collection for matching projects.
This Hickory Hardware Bar Pull with 7-9/16 inch (192 mm) center to center spacing suits cabinet runs planned around that metric hole pattern, so installers can standardize drilling across doors and drawers. The 10 inch length and 1-1/4 inch projection define how it will sit on wider fronts and in walkways, giving a clear sense of the handle footprint during design. With steel construction and a stainless steel finish, this Belwith Keeler bar pull matches contemporary cabinet projects that carry stainless details through the space. Use this model when a consistent 192 mm bar pull is needed to tie together modern cabinets from one end of the room to the other.
Sold In: 1 Each
