Hickory Hardware Bar Pull uses a 5-1/16 inch center to center size to create a consistent handle layout across doors and drawers, so drilling patterns stay the same from cabinet to cabinet. The brushed black nickel finish provides a dark, muted metallic look that suits Contemporary home styles, helping cabinets and furniture read as one coordinated run. Made from steel, this pull gives a solid feel when opening and closing doors, which matters on heavier cabinet fronts. The 7-7/16 inch overall length spans more of the rail or stile, visually anchoring wider fronts. A 1/2 inch width presents a slim face, which works well when multiple pulls line up in a kitchen or bath. With a 1-1/4 inch projection, the pull stands off the surface enough for a comfortable grip while keeping the profile close to the cabinet.
This Hickory Hardware Bar Pull uses a 128 mm center to center hole spacing, so layout is based on a simple metric distance between fasteners. The 7-7/16 inch overall length gives clear end points to reference off door or drawer edges during marking. With a 1-1/4 inch projection, the pull extends far enough from the face for fingers to wrap behind, which is important on thicker door edges. The 1/2 inch width keeps the footprint modest, so there is workable clearance when pulls are used side by side on narrow drawer fronts. The brushed black nickel finish runs across the full pull, creating a uniform appearance once mounted.
This Belwith Keeler Hickory Hardware Bar Pull fits cabinets and furniture drilled on a 5-1/16 inch center to center pattern, which is common on many Contemporary installations. The 7-7/16 inch length works on both base and wall cabinet doors, giving enough span to look proportional without overwhelming mid-size fronts. On drawer fronts, the 1/2 inch width keeps the pull visually light, which is helpful on stacked drawers where hardware lines up vertically. The brushed black nickel finish supports projects that use darker tones or mixed metals, allowing this pull to coordinate with other brushed surfaces in a room. The steel construction serves well in high-use areas such as kitchens, baths, and shop cabinets where hardware sees frequent operation.
The 128 mm center to center measurement allows installers to standardize drill jigs, which reduces layout time over multiple cabinets. A 1-1/4 inch projection gives enough stand-off to clear most door styles and edge profiles, helping hands avoid rubbing against the cabinet surface during use. The slim 1/2 inch width makes alignment checks straightforward because the bar reads as a clean, straight line across adjacent fronts. The brushed black nickel finish helps minor fingerprints read less harshly than high-polish surfaces, maintaining a steadier installed appearance between cleanings. Because the pull length is fixed at 7-7/16 inches, installers can easily align hardware ends relative to door and drawer edges to keep reveals and sightlines consistent across a project.
The Hickory Hardware Bar Pull has 5-1/16 inch (128 mm) center to center spacing, 7-7/16 inch overall length, 1-1/4 inch projection, and a 1/2 inch width, which defines its footprint on the cabinet.
The pull is made from steel with a brushed black nickel finish, giving a solid metal feel and a dark, brushed surface that coordinates with Contemporary decorative hardware.
The 128 mm center to center spacing provides a consistent hole pattern, which allows installers to use the same jig setup across multiple fronts for faster, repeatable drilling.
The brushed black nickel finish suits Contemporary home projects where a dark, muted metallic pull supports a coordinated look with other modern decorative cabinet hardware.
This pull is from the Hickory Hardware Bar Pull Collection and is produced under the Belwith Keeler brand, aligning it with their decorative cabinet hardware lines.
The HH075595-BBLN manufacturer part number identifies this specific steel bar pull with 128 mm center to center spacing and brushed black nickel finish within the Hickory Hardware line.
The Hickory Hardware Bar Pull in brushed black nickel offers a 5-1/16 inch center to center layout, which supports uniform drilling across a run of cabinets. Its 7-7/16 inch overall length and 1-1/4 inch projection provide comfortable, predictable hand access on doors and drawers. The 1/2 inch width and steel construction keep the profile streamlined yet solid in daily use. For projects using Belwith Keeler decorative cabinet hardware, this Bar Pull Collection piece delivers a defined size, finish, and feel that can be repeated throughout kitchens, baths, or furniture runs to maintain a consistent Contemporary look.
Sold In: 1 Each
