Hickory Hardware Bar Pull For Contemporary Cabinets

Hickory Hardware Bar Pull gives cabinets and drawers a modern straight-bar grip that suits contemporary layouts where clean lines matter. The pull has a 3-3/4 inch (96 mm) center to center drilling, so it lines up with standard cabinet boring patterns and supports straightforward layout on new work or change-outs. The brushed black nickel finish keeps reflections subdued, which helps the handle read as a quiet accent instead of a bright focal point on doors and drawer fronts. Steel construction gives the pull a solid feel under load, so the handle stands up to regular cabinet use in busy kitchen or shop environments. With an overall length of 6 inches, there is hand space across the bar for comfortable everyday operation on base cabinets, wall cabinets, and drawer stacks.

Key Bar Pull Details For Cabinet Projects

• The 3-3/4 inch (96 mm) center to center dimension aligns the mounting holes for use on cabinets drilled to this common spacing, which simplifies layout when repeating the pull across a full run of doors and drawers.
• The 6 inch overall length gives visual presence on wider drawer fronts and taller doors, helping the pull stay proportional to standard cabinet faces during design or replacement work.
• The 1-1/4 inch projection sets the gripping bar out from the cabinet surface, leaving finger clearance for a positive grip while keeping the handle close enough to avoid snagging in tight traffic areas.
• The 1/2 inch width provides a slim bar profile that supports a modern appearance while still offering enough surface for a comfortable handhold on frequently used cabinets.
• The brushed black nickel finish delivers a dark, muted metal tone that coordinates with contemporary color schemes and helps tie together appliances, fixtures, and other decorative hardware.
• The steel material creates a sturdy bar pull body that handles repeated opening and closing, which is important on kitchen, bath, or shop cabinets that see daily use.

Mounting This 96mm Center To Center Pull

This Belwith Keeler bar pull uses a 96 mm center to center mounting pattern, so the fixing points land on that exact spacing when drilling or aligning to existing holes. That fixed measurement supports consistent positioning across a bank of cabinets, which keeps hardware lines straight from door to door. The 1-1/4 inch projection defines how far the pull stands off the face, affecting both how hands fit behind the bar and how close the hardware stays to adjacent cabinets or walls. With a 1/2 inch bar width, the mounting footprint remains narrow, which matters when installing near panel edges or tight rail and stile layouts on framed cabinet construction.

Using This Brushed Black Nickel Bar Pull

Where This Steel Bar Pull Works Best

This Hickory Hardware Bar Pull from the Bar Pull Collection is suited to contemporary cabinet projects where straight-line hardware ties the room together. The 3-3/4 inch (96 mm) center to center spacing matches a widely used drilling pattern, so it can be used across kitchen cabinets, bath vanities, and shop storage built to that layout. The brushed black nickel finish lets the pull coordinate with other dark, muted metal components in the room, which keeps finishes consistent across hinges, faucets, or lighting using similar tones. At 6 inches in total length, the pull spans a useful portion of standard drawer fronts, so a single pull provides enough reach on many drawer widths without looking undersized. The steel construction supports use on heavily loaded drawers and frequently accessed cabinet doors because the bar is built from metal stock rather than a lighter decorative material.

Details That Support Consistent Cabinet Results

The 96 mm center to center measurement on this Belwith Keeler bar pull makes it easier to repeat hole locations with jigs or boring equipment, which helps keep rows of pulls level on multi-cabinet runs. A 1-1/4 inch projection sets the handle off the face just enough for fingers to wrap behind the bar without the pull sticking far into the room, which supports comfortable grip while limiting interference with nearby doors or appliances. The 1/2 inch width gives the bar a slim profile, so doors can swing past each other in close reveals with less risk of hardware-to-hardware contact. The brushed black nickel finish on steel provides a dark metallic surface that visually hides minor fingerprints more effectively than a highly polished finish, which matters on cabinets opened many times each day. As part of the Bar Pull Collection from Hickory Hardware, this pull keeps a consistent bar-style geometry, which helps installers repeat the same look across upper cabinets, base cabinets, and drawer banks within one project.

Common Questions On This 3-3/4 Inch Pull

Select This Pull For 96mm Cabinet Layouts

This brushed black nickel cabinet pull from the Hickory Hardware Bar Pull Collection combines a 3-3/4 inch (96 mm) center to center layout with a 6 inch bar length, giving a straightforward solution for contemporary cabinets drilled on this spacing from Wurth Baer Supply.