Hickory Hardware Bar Pulls Series 7-9/16" (192 mm) Center to Center Brushed Black Nickel Pull, - HH075597-BBLN

Hickory Hardware Bar Pull For Contemporary Cabinets

Hickory Hardware Bar Pull gives you a modern cabinet handle sized for 7-9/16 inch (192 mm) center-to-center drilling, so you can span wider drawer fronts or doors with a single straight pull that feels balanced in daily use. The steel construction provides a solid, rigid handle that stands up to repeated opening and closing in busy kitchen, bath, or shop cabinetry. A brushed black nickel finish delivers a dark, muted metal look that reads contemporary while softening fingerprints compared to a high-polish surface. The full 10 inch overall length creates a strong visual line across wider fronts, helping you line up handles consistently across banks of cabinets. A 1-1/4 inch projection sets the grip out from the door face, giving fingers room to pull without knuckles brushing the panel.

Key Bar Pull Details That Support Your Work

• The 7-9/16 inch (192 mm) center-to-center dimension matches common drill patterns, so you can retrofit existing holes or lay out new runs with predictable spacing across multiple fronts.
• The 10 inch overall length gives you a generous grip area, which helps on heavier drawers where users like to grab near either end for better leverage and smoother motion.
• The 1/2 inch width keeps the bar slim, so it sits lightly on the face of the cabinet while still presenting enough surface for a comfortable hand-feel on narrow doors and drawers.
• The brushed black nickel finish tones down reflectivity, which helps pulls visually blend with darker fronts and reduces glare along long rows of cabinets.
• The steel material gives the pull a firm, weighty feel when operated, which helps doors and drawers close with a confident motion in higher-use areas.

Installation Dimensions For Accurate Handle Layout

The 192 mm center-to-center measurement defines exactly where your two mounting points land, simplifying jig setup when drilling repeated runs on multiple doors or drawer fronts. With a 10 inch overall length, you can reference both the center points and the bar ends when aligning to rail edges or panel reveals. The 1-1/4 inch projection keeps the bar far enough off the surface for fingers to wrap behind, while still holding the handle close to the face so fronts do not feel crowded. At 1/2 inch width, the bar seats neatly on standard face-frame or frameless fronts without covering excessive stile width.

Using This Belwith Keeler Bar Pull In Projects

Where This Brushed Black Nickel Pull Works Best

The Bar Pull Collection from Hickory Hardware is described as a chic, modern pull that complements a contemporary home, so it suits flat-panel or clean-lined cabinet designs where straight hardware reinforces the geometry. The brushed black nickel finish pairs well with darker paints or stains, helping the pull read as part of the overall composition rather than a bright accent. Because the handle belongs to the Bar Pull Collection, it visually aligns with other pulls from the same family, which helps maintain a consistent atmosphere across kitchens, baths, and built-ins in open-plan spaces. The 7-9/16 inch center-to-center size fits medium to wide drawers and taller doors, making it practical wherever a longer handle improves reach and grip.

Details That Support Repeatable, Aligned Installations

The defined 192 mm center-to-center drilling dimension lets you standardize hole locations, so every pull in a run lands at the same height and distance from the door edge. A 10 inch overall length provides an easy reference when checking alignment by eye along cabinet tops or drawer banks. The 1-1/4 inch projection ensures a consistent stand-off from the face across all fronts, which keeps shadow lines uniform when doors and drawers are closed. The 1/2 inch width keeps the bar visually light, which helps long rows of hardware look straight rather than bulky. With the manufacturer part number HH075597-BBLN, you can match this specific size and finish across future phases or service work, maintaining continuity with earlier installations.

Common Questions About This 192mm Bar Pull

Select This Pull For Consistent Contemporary Runs

The Hickory Hardware Bar Pull with 192 mm center-to-center drilling, 10 inch overall length, and brushed black nickel finish gives you a defined combination of size, look, and projection to repeat across cabinets. Using this Belwith Keeler steel bar pull lets you carry the same modern profile from one run of cabinetry to the next, keeping your installation layout, drilling, and visual lines consistent from project to project.