Hickory Hardware Bar Pull For Contemporary Cabinets

Hickory Hardware Bar Pull is a steel cabinet pull from the Bar Pull Collection that provides a modern, linear grip for doors and drawers, giving contemporary installations a consistent, streamlined look. The 10-1/16 inch (256 mm) center-to-center dimension spaces the mounting holes for standard long drawer fronts, helping installers align multiple pulls in straight, repeatable runs. The brushed black nickel finish tones down reflections, which helps the pull visually blend across a full bank of cabinets. Overall length of 12-7/16 inches extends past the mounting points, offering extra finger clearance along wider fronts. A 1-1/4 inch projection sets the pull off the face of the cabinet, creating room for a comfortable handhold while still keeping the profile tight for narrow walkways. The 1/2 inch width presents a slim face, which suits minimalist designs and keeps the hardware visually light on larger panels.

Key Bar Pull Details That Matter On The Job

• The 10-1/16 inch (256 mm) center-to-center layout sets a precise drilling pattern, supporting straight, repeatable hole placement across multiple doors and drawers.
• The brushed black nickel finish offers a dark, muted metal appearance that supports contemporary cabinet schemes where low-glare hardware is preferred.
• Steel construction provides a solid bar pull body that stands up to regular door and drawer operation in busy kitchen or shop environments.
• The 12-7/16 inch overall length gives added hand contact area, which helps when pulling wide, heavy drawers in everyday use.
• The 1-1/4 inch projection creates working clearance between the cabinet face and the pull, which helps fingers grasp the bar without rubbing the surface.
• The 1/2 inch width keeps the pull visually slim, helping installers maintain a clean, minimalist line across banks of upper and lower cabinets.

Installation And Fit For The 10-1/16 Inch Bar Pull

The 10-1/16 inch center-to-center dimension defines where mounting holes land, guiding jig setup for both new cabinet builds and hardware change-outs. This spacing works well on medium to wide drawer fronts, giving enough spread for smooth pulls without crowding the panel edges. A 1-1/4 inch projection sets the working distance off the door or drawer face, which helps when aligning pulls near adjacent walls or appliances because the handle does not protrude excessively. The 12-7/16 inch overall length means the bar extends beyond the mounting points, giving visual balance on wider fronts and aiding alignment with other long pulls in the same run. With a 1/2 inch width, this pull pairs well where a narrow, linear handle is preferred, so hole placement can be planned to keep consistent reveals around neighboring fronts.

Using This Belwith Keeler Pull In Real Projects

Where This Brushed Black Nickel Pull Works Best

The Hickory Hardware Bar Pull Collection is described as a chic, modern pull that complements a contemporary home, so it suits projects built around clean cabinet faces and simple lines. On kitchen or bath runs with flat-panel or minimally profiled doors, the 12-7/16 inch long bar visually stretches across the front, reinforcing linear design. The brushed black nickel finish supports schemes using darker appliances or fixtures because its softened sheen reduces contrast jumps from front to front. In living spaces or offices using matching casework, repeating the same 10-1/16 inch center-to-center pull across storage units supports a consistent atmosphere, which is important when the goal is uniform hardware from room to room. Because this pull is part of the Belwith Keeler decorative hardware offering, it aligns with projects where coordinated cabinet details are valued.

Details That Support Consistent, Repeatable Results

The fixed 256 mm center-to-center spacing lets installers set up drilling jigs or CNC programs once and repeat the pattern across an entire job, reducing layout variation from cabinet to cabinet. The 1-1/4 inch projection and 1/2 inch width define the clearance envelope off the face, which helps when planning hardware positions relative to door reveals and drawer seams so pulls do not visually crowd each other. Overall length of 12-7/16 inches provides a reference when laying out handles on tall doors, because the bar length can be aligned with panel proportions for consistent sightlines. The brushed black nickel finish gives a predictable appearance under typical room lighting, which matters on large installations where color and sheen shifts would stand out. As part of the Hickory Hardware Bar Pull Collection, this model can be selected when a project calls for modern pulls that keep cabinet fronts looking coordinated across multiple elevations.

Common Questions About This Hickory Hardware Bar Pull

Select This Pull For Contemporary Cabinet Runs

The Hickory Hardware Bar Pull with 10-1/16 inch (256 mm) center-to-center spacing, 12-7/16 inch overall length, and 1-1/4 inch projection offers a defined, repeatable layout for long cabinet fronts. Steel construction and a brushed black nickel finish support contemporary residential or commercial casework where consistent hardware lines matter. For projects built around the Belwith Keeler decorative hardware family, this Bar Pull Collection piece provides a straightforward way to keep modern cabinets visually aligned from one bank to the next.