14 inch self close drawer slide describes this Hickory Hardware 1700 Series roller and polyslide bottom mount drawer slide that supports drawers carrying up to 75 lb, so standard storage loads stay supported in regular cabinet use. The 3/4 extension travel lets the drawer open far enough to see and reach stored items while still keeping part of the drawer supported inside the cabinet. The self-closing feature pulls the drawer fully shut at the end of travel, which helps drawers stay closed in normal use without extra effort. This slide is unhanded and side mount, so the same part can be installed on either side of the drawer, simplifying product selection for multiple cabinet openings. The white finish gives a clean appearance that blends with light-colored casework, which suits many residential and shop cabinet interiors.
This roller and polyslide 3/4 extension bottom mount drawer slide works as a side mount, so it fits along the drawer sides while supporting from below. Being unhanded means the same P1700/14-W slide part installs on either the left or right, which simplifies stocking and layout when multiple drawers in a run use the same hardware. The 14 inch length provides a clear reference when sizing drawer boxes relative to cabinet depth, so the slide travel matches the cabinet interior for smooth operation. With the bottom mount configuration helping steady the drawer under weight, the 75 lb rating applies to typical drawer use where the slide supports the moving load.
This Hickory Hardware 14 inch 3/4 extension self-close epoxy coated Euro slide fits applications that call for a side mount drawer slide with bottom mount support under everyday loads. The 75 lb capacity aligns with drawers holding common tools, kitchen items, or shop supplies, so storage in cabinets remains practical without overbuilding the hardware. The white epoxy coated Euro style finish pairs well with painted, melamine, or light laminate interiors, which keeps hardware visually consistent when the drawer is open. Because the slide is unhanded, the same P1700/14-W unit can be used on both sides of the drawer, which streamlines layout when planning banks of drawers that repeat the same slide throughout a project. The roller and polyslide design provides guided movement along the track, which supports predictable motion over the 3/4 extension travel. In cabinets where full extension is not required, this travel still exposes most of the drawer box for access while keeping some support inside the case.
The self-closing feature on this 1700 Series slide takes over during the last part of closing, which helps drawers seat consistently against the front without constant manual adjustment. That behavior supports a uniform finished look across multiple drawers, since each drawer is drawn into the same closed position by the slide mechanism. The 3/4 extension travel limits how far the drawer projects from the cabinet, which can be useful where walkways or work aisles run close to casework and reduced projection is preferred. The 14 inch length also coordinates with cabinet depths commonly found in residential and shop installations, so drawer construction can follow familiar sizing. With bottom mount support contributing to heavy duty maximum stability, the slide helps control side-to-side play under load, which supports smooth operation when drawers are opened and closed many times during daily work. Sold in both broken and full box quantities, with discount available for full box or full case orders, this slide suits both single-job needs and larger cabinet runs.
The P1700/14-W is a Hickory Hardware 1700 Series roller and polyslide bottom mount drawer slide, which provides guided movement using rollers along a Euro style track.
The slide offers 3/4 extension travel, so the drawer opens most of the way while part of the box remains supported inside the cabinet during use.
This bottom mount drawer slide is rated for up to 75 lb, so it supports typical household and shop storage loads in everyday cabinet applications.
This drawer slide is unhanded and side mount, so the same P1700/14-W part can be installed on either the left or right side of the drawer.
The slide has a white finish with an epoxy coated Euro style, which coordinates with light-colored cabinet interiors and provides a clean appearance.
The self-closing feature engages near the end of travel to pull the drawer fully closed, which helps drawers stay shut between uses in busy spaces.
The Hickory Hardware 14 inch 3/4 extension self-close epoxy coated Euro slide P1700/14-W brings a 75 lb rating, bottom mount stability, and an unhanded side mount design together for routine cabinet drawers. The self-closing feature and 3/4 extension travel support everyday access while keeping drawers seated cleanly against the fronts. For cabinet runs that repeat the same slide length and performance, this 1700 Series model offers a consistent approach, and quantity discounts for full box or full case orders support larger woodworking and cabinet projects.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Pair | BWP1700/BKT-W Mfr# P1700/BKT-W | Drawer Slides Accessories Bracket Drawer Slide White Plastic White |