Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hickory Hardware 1700 Series 20 inch Euro slide is a steel roller-bearing slide in a white epoxy finish, delivering self-closing convenience and a clean, color-blended look inside white and white-laminate cabinet interiors. It mounts on the side, requires no handed matching, and is rated for standard-duty cabinet drawer work.
The 1700 Series fits naturally into cabinetry where the drawer interior is visible and white hardware would otherwise stand out. White melamine kitchen and bath cabinets, painted built-ins, and closet organizers are the right home for this slide. Because the hardware color disappears against the cabinet lining, the finished drawer looks cleaner than it would with an exposed zinc or chrome member. At 3/4 extension, the drawer opens far enough for everyday access to contents — cutlery, toiletries, folded clothing — without requiring the deeper cabinet depth that a full-extension three-member slide demands. It is a working-capacity slide, not a showpiece: choose it when the install is indoors, loads stay well within the 75 lb rating, and matching the interior color matters as much as the mechanism.
Steel members carry the load; nylon rollers provide the bearing surface between cabinet and drawer profiles. The white epoxy powder-coat is baked on, giving it better adhesion and chip resistance than a brush-applied finish. Epoxy in this application is a color and corrosion choice — it keeps the steel from oxidizing in a dry interior environment and lets the hardware recede visually against a white panel. This slide is for indoor cabinetry only; it is not rated for humid, outdoor, or wet-area installation.
Side-mount installation calls for 1/2 inch of side clearance per side, so the drawer box should be built 1 inch narrower than the inside cabinet opening. At 20 inches, this slide suits cabinet depths in the standard kitchen and bath range. Because the slide is non-handed, the same part number covers both sides of the drawer — order two of this SKU and each drawer is outfitted without sorting left from right. The self-closing ramp is built in, so no additional closing hardware is needed. Match the slide length to your drawer depth when sizing for a new build or a replacement.
No. The 1700 Series closes on a built-in ramp that pulls the drawer fully shut once it enters the capture zone. That is a positive, undamped self-close — the drawer moves home under spring tension, not a damper. A soft-close mechanism slows the drawer to a quiet landing; this slide does not include one.
Two — one for each side. Because the 1700 Series is non-handed, both sides use the same SKU. Order two of this item per drawer.
It can, but face-frame cabinets set the cabinet side back from the front frame. Depending on the frame depth, you may need rear mounting sockets or brackets to support the back end of the slide. Check the frame depth against the slide's mounting requirements before installation.
This is a 3/4-extension slide. On a 20 inch slide the drawer travels roughly three-quarters of that length — the last few inches of the drawer box stay inside the cabinet at full open. If full rear access is a requirement, a full-extension slide is the right choice.
This slide is designed for dry indoor environments. Persistent humidity or occasional moisture exposure can compromise the epoxy finish and the steel members over time. For wet-area applications, look for a slide rated for that environment.
When the finish color matters as much as the function, the 1700 Series white epoxy slide gives you a self-closing, standard-duty drawer runner that disappears into the cabinet rather than calling attention to itself.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Pair |  BWP1700/BKT-W Mfr# P1700/BKT-W | Hickory Hardware P1700 4" Rear Mounting Socket, White, P1700/BKT-W |