Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hickory Hardware 1700 Series 22 inch Euro slide is an epoxy-coated, steel roller slide with 3/4 extension, a self-closing ramp, and a white finish — built for cabinetry where a longer-than-standard slide length matches deeper drawer boxes. It is non-handed, so the same part works on either side of the drawer, and sold as a complete set for one drawer.
Most production kitchen and bath drawers run in the 16 to 20 inch range, but deeper base cabinets — particularly 24 inch depth boxes or cabinets with extra interior clearance — call for a longer slide. The 22 inch 1700 Series fits that gap: longer than the stock length without stepping up to a specialty heavy-duty product. It suits utility drawers in a deep base cabinet, pantry pull-outs in shallower configurations, or any run where an 18 or 20 inch slide comes up short on installation depth.
The steel members carry a white epoxy powder-coat finish standard to this segment. Epoxy is a baked-on color coating, not a structural feature — its job is to disappear against white interiors so the slide hardware does not show when the drawer is open. The nylon roller bearing system runs quietly under everyday loads and holds up through normal residential cycling. Side clearance is 1/2 inch per side, so the drawer box should be built 1 inch narrower than the cabinet opening.
Cabinet shops and contractors specifying a white epoxy slide for deeper-than-standard base cabinets will find the 22 inch 1700 Series a straightforward fit. It is also a practical choice for homeowners replacing worn slides in an existing deep-run drawer where a shorter replacement would leave a gap at the back. The non-handed format simplifies ordering — one part number handles left and right — which matters on larger runs where tracking two handed SKUs adds complexity. This is a standard-duty residential slide; for drawers carrying tools, canned goods in volume, or other heavy loads, confirm the 75 lb per pair rating fits the application before specifying.
Self-close. The 1700 Series uses a mechanical ramp that pulls the drawer shut once it enters the capture zone. There is no damper, so the close is positive rather than slowed. If you need a damped, silent landing, that is a soft-close product — a different feature this slide does not include.
This is a 3/4-extension slide, so the drawer travels roughly three-quarters of the slide length before stopping. The rear portion of the drawer stays inside the cabinet at full open. If you need the entire drawer to clear the cabinet face, you would need a full-extension slide.
No. The 1700 Series is non-handed — the same part installs on either side of the drawer. One set covers both sides.
The 1700 Series is a side-mount slide with 1/2 inch clearance per side. It installs in both face-frame and frameless cabinets. In a face-frame cabinet, you will need rear mounting sockets or brackets at the back of the slide to support the rear end — those are sold separately and must match the 1700 Series.
75 lb per pair — the standard-duty class for residential cabinetry. That rating covers the combined load on both slides together, not per individual slide.
When the cabinet is deep enough that a standard-length slide falls short, the 22 inch 1700 Series steps in with the same white epoxy finish, self-closing convenience, and non-handed simplicity — sized for the job without overbuilding it.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Pair |  BWP1700/BKT-W Mfr# P1700/BKT-W | Hickory Hardware P1700 4" Rear Mounting Socket, White, P1700/BKT-W |