
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
The Hickory Hardware 1700 Series P1700/16-W is a 16 inch, white epoxy-coated Euro roller slide rated at 75 lb with a self-closing ramp and 3/4 extension, sold as a complete non-handed set for one drawer. Its 16 inch length makes it a natural fit for cabinets where depth is limited and a full-length slide simply will not land.
Sixteen inches is the right length when the cabinet or furniture piece simply does not have the depth for an 18, 20, or 22 inch slide. Think of a bathroom vanity with a shallow lower drawer, an island prep cabinet with a compact drawer for utensils, or a bookcase base with a small storage pull-out. The 1700 Series covers all of these without requiring an oversized opening or awkward trimming. The 1/2 inch of side clearance per side is the standard Euro-slide allowance, so the drawer box formula is straightforward: build the box 1 inch narrower than the inside cabinet width and set the slide at the bottom edge of the drawer side.
The white epoxy powder-coat over steel is a color match for white melamine interiors, painted cabinet boxes, and light-finish plywood cases. Epoxy coating on Euro slides is a finish choice first — it keeps the slide visually quiet inside the cabinet rather than drawing the eye to a bare zinc or raw-steel member. The steel members run on nylon rollers, which keep the drawer moving quietly under everyday loads. The self-closing ramp engages as the drawer approaches closed and pulls it the rest of the way home. This is a positive, undamped close — self-close, not soft-close. There is no damper slowing the final movement, so the close is firm rather than silenced. For vanities and closets where a positive snap-shut is perfectly acceptable, that is not a drawback.
Homeowners updating a builder-grade vanity or retrofitting a furniture piece will find the non-handed design removes the guesswork of matching left and right parts. Designers specifying shallow pull-out drawers in island or desk runs can call out a single SKU for both sides. Cabinet shops running short-depth drawer boxes in volume can order one set per drawer with no sorting by hand. The 75 lb capacity handles spice drawer loads, bathroom storage, and most utility pulls without being sized for a pots-and-pans application.
Yes. The 1700 Series is non-handed and sold as a complete set, so one line item installs one full drawer.
No. The 1700 Series uses a self-closing ramp — a positive, undamped close that pulls the drawer shut. Soft-close uses a damper to slow and quiet the final movement. This slide does not have a damper.
One-half inch per side, so build the drawer box 1 inch narrower than the inside cabinet width.
This is a 3/4-extension slide. On a 16 inch slide the back few inches of the drawer remain inside the cabinet at full open. It does not bring the entire drawer out to the cabinet face.
The 1700 Series is a standard Euro roller slide. In a face-frame cabinet the back end of the slide needs rear support — check whether the series offers matching rear sockets or brackets before installing in face-frame construction.
When the cabinet is shallow and a longer slide means a compromised install, the 16 inch 1700 Series delivers the same self-closing white epoxy performance as the longer members in the family — sized for the job at hand.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Pair | BWP1700/BKT-W Mfr# P1700/BKT-W | Hickory Hardware P1700 4" Rear Mounting Socket, White, P1700/BKT-W |