Hickory Hardware 24" 3/4 Extension Self-Close Epoxy Coated Euro Slides 1700 Series, Unhanded Side Mount White - P1700/24-W

24 Inch Bottom Mount Drawer Slide For Storage

24 inch bottom mount drawer slide describes this Hickory Hardware 1700 Series roller and polyslide unit, so you get a defined 24 inch length for planning cabinet depths and drawer box sizes. The 3/4 extension travel lets the drawer open far enough for access while keeping part of the slide engaged, which supports stable movement under load. The self-closing feature pulls the drawer shut at the end of travel, which helps drawers settle in the cabinet without extra effort. An epoxy coated euro slide design provides a smooth coated surface on the track, which supports consistent rolling over time. This model is unhanded side mount, so the same slide design works on either side location during layout. A stated capacity up to 75 lb defines how much stored weight the slide is built to handle in service.

Key Drawer Slide Details For Daily Use

• The 3/4 extension travel controls how far the drawer projects, keeping part of the slide inside the cabinet, which helps support the drawer under weight while still letting users reach stored items efficiently.
• The self-closing feature draws the drawer into its closed position during the last portion of travel, which helps fronts sit consistently against the cabinet and reduces drawers left partially open in busy spaces.
• The roller and polyslide configuration creates a guided rolling contact between components, which supports smooth opening and closing under typical cabinet loads and helps drawers feel predictable in use.
• The epoxy coated euro construction adds a coated surface along the slide path, which supports low-friction movement and helps the moving parts track reliably across repeated cycles in a shop, office, or home setting.
• The up to 75 lb capacity rating sets a defined working load limit, which helps match this slide to drawers storing tools, supplies, or household items that fall within that weight range.
• The unhanded side mount design means the same slide pattern seats on either cabinet side, which simplifies ordering by part number and streamlines installation layout on both left and right locations.

Installation Role Of This Bottom Mount Slide

This roller and polyslide 3/4 extension bottom mount drawer slide is identified as a side mount drawer slide, which means it is intended to register along the drawer sides and cabinet interior for alignment. The 24 inch length gives a fixed measurement for placing rear supports and front clearances, which helps line up the slide with the cabinet depth. The self-closing action engages near the end of travel, so positioning the slide square in the opening helps that pull-in feel even and reliable. The white finish on this 1700 Series unit provides a neutral look along the cabinet interior, which can matter when the slide is visible inside lighter-colored casework. With a stated capacity up to 75 lb, this slide fits drawers expected to handle moderate storage weight in cabinetry projects.

Using The P1700/24-W Slide In Projects

Where This 24 Inch Euro Slide Fits Best

This Hickory Hardware 24 inch 3/4 extension self-close epoxy coated euro slide suits cabinets built to a 24 inch slide length, so the runner can sit fully supported from front to back. The bottom mount description reflects its role supporting the drawer from below, while the side mount product class shows it aligns with standard side-mounted drawer slide layouts in woodworking projects. The up to 75 lb capacity range positions this Belwith Keeler P1700/24-W slide for drawers carrying typical shop supplies, office files, or household items, where weight stays within that rating. The white finish pairs well with light-colored cabinet interiors, so the mounted slide visually blends into painted or melamine cases. As a roller and polyslide unit, it suits applications where straightforward, consistent movement matters more than full extension reach.

Why These Slide Details Support Reliable Motion

The 3/4 extension design keeps part of the slide nested inside the cabinet throughout use, which helps maintain alignment and stability when drawers are opened with loads approaching the 75 lb capacity. The self-closing feature at the end of travel pulls the drawer front into position, which supports doors and drawer fronts lining up evenly across a run of cabinetry without repeated adjustments. The epoxy coated euro construction creates a smooth, coated bearing surface for the rollers, which supports predictable opening effort from day to day. As an unhanded side mount slide, the P1700/24-W uses the same pattern for left and right sides, which simplifies layout and reduces part variation on multi-drawer installations. The defined 24 inch length allows consistent setback measurements from the cabinet front, which supports repeatable installations across multiple cabinet boxes and helps drawers track square in their openings.

Common Questions About The P1700/24-W Slide

Select This Slide For Rated 24 Inch Drawers

The Hickory Hardware 24 inch 3/4 extension self-close epoxy coated euro slide 1700 Series, P1700/24-W, offers a defined 24 inch length, up to 75 lb capacity, and self-closing action, which together support consistent drawer performance. For cabinet projects using side mount drawer slides, these roller and polyslide units help deliver stable travel and a clean white interior look. Matching drawers to this 24 inch bottom mount, unhanded side mount design supports straightforward layouts across multiple cabinets and helps maintain uniform motion from one drawer to the next.