Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt 8810 Series is a 12 inch full-extension side-mount ball bearing drawer slide rated 200 lb per pair, finished in zinc for lasting indoor service. It is the right slide when standard 100 lb cabinet-class hardware is simply not enough drawer for the job.
A loaded tool drawer, a pantry pull-out stocked with canned goods, a heavy shop-storage cabinet — these are the applications where a standard 100 lb kitchen slide reaches its limit before the work is done. The 8810 series carries twice that load per pair on full ball bearing raceways, and full extension means the drawer comes all the way out to the cabinet face. Nothing stays buried in the back.
The 12 inch length suits shallower cabinets and compact utility installations: shop wall cabinets, base units with limited interior depth, and mobile work carts where a shorter slide is the right fit for the box. Side clearance for this series is 3/4 inch per side, which is wider than the 1/2 inch standard for most side-mount ball bearing slides — build the drawer box accordingly.
The 8810 series is cold-formed steel with a zinc electroplate finish. Zinc is the working standard for side-mount ball bearing slides in indoor environments: it resists corrosion through years of shop and kitchen service without adding bulk to the slide profile. The finish is functional rather than decorative — when the drawer is closed, the slide is mostly out of sight inside the cabinet. For damp or outdoor environments, zinc plating is not rated; this slide is for dry indoor use.
Cabinet shops and contractors who regularly build utility storage, shop furniture, or heavy base cabinets will recognize when a heavier-class slide belongs on the spec. The 8810 series fits frameless cabinets directly on the standard 32mm hole pattern. In face-frame construction, rear mounting support is required at the back of the slide — add the matching rear brackets, sold separately, before the install. The Bulk-Pack format keeps enough stock on hand for multi-drawer projects without repeated small orders.
No. Twelve inches is the closed length of the slide. Because this is a full-extension slide, the drawer member travels approximately the full slide length, bringing the whole drawer out to the cabinet face — but slide length and travel distance are two separate specs.
The 8810 series is a heavier-built slide rated at 200 lb per pair, and its profile requires 3/4 inch of side clearance. Build the drawer box 1-1/2 inches narrower than the cabinet opening to account for both sides.
Neither. The 8810 is a standard-motion slide — no damper and no spring assist. The drawer stays wherever it is left until pushed or pulled.
No. The 8810 series is non-handed, so both slides in the pair are identical and fit either side of the drawer.
Yes, but face-frame construction requires rear mounting support. Add the matching rear brackets, sold separately, to support the back end of the slide where the cabinet side is set back from the face frame.
When the load demands more than the standard cabinet class can deliver, the KV 8810 series provides the capacity, full extension, and zinc durability to keep the drawer running the way it should.
Sold In: 4 Set
