Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 28 inch full extension drawer slides are side mount, ball bearing slides designed as standard-duty hardware for drawers that need full access to their contents. The 28 inch length establishes the drawer depth these slides support, which matters when sizing casework or replacing existing hardware at the same length. The slide width of 3/4 inch defines the side clearance requirement, allowing planning of cabinet openings to match the hardware profile. A height of 2.09 inches provides vertical bearing surfaces, which supports drawer stability under load. The non-handed design allows the same slide to be used on either side of the drawer, simplifying layout and reducing part differentiation on the job. A hold-in anti-rebound feature helps the drawer stay in the closed position, which matters for installations where movement from vibration or minor bumps would be disruptive.
The 8810B 28 side mount configuration positions the slide along the drawer sides, which pairs well with cabinet boxes framed or frameless that are dimensioned for side-mounted runners. A side clearance of 3/4 inch plus 0.03 inch minus 0 inch describes the space between drawer side and cabinet side that this slide is engineered to occupy, which gives installers a target clearance when sizing drawer boxes relative to the cabinet opening. The slide width of 3/4 inch ties directly to that clearance requirement, reinforcing the drawer sizing needed for smooth travel. Specified height of 2.09 inches indicates the vertical space the slide occupies along the drawer side, which matters when drawers have tight vertical spacing between adjacent fronts or internal dividers near the slide location.
The Web Description states that this 28 inch slide is recommended for drawers up to 42 inches wide, which positions the hardware for applications where drawers span significant cabinet width. This capability matters in shop cases, residential cabinetry, or storage units that rely on broad drawers to hold bulkier items. The side mount drawer slide construction matches cabinet designs that allow mounting rails or solid sides to accept slides along their depth. Because the product is part of the Knape and Vogt 8810 series and classified as side mount drawer slides, it fits projects where installers want to keep slide hardware concealed along the drawer sides rather than under the drawer. The zinc finish described in the SAP data supports use in typical indoor woodworking environments, aligning with cabinetry where a plated steel slide is standard practice. A 28 inch length combined with a recommendation for up to 42 inch wide drawers gives a practical relationship between drawer depth and potential width, which assists when balancing box proportions for storage and support.
The Knape and Vogt slide uses heavy-duty ball bearings that carry the heaviest loads without sticking, which directly influences how reliably a wide, filled drawer will travel after installation. This matters on repeat jobs where predictable movement reduces callbacks related to binding under load. Full extension travel lets the drawer leave the cabinet by approximately its full 28 inch length, which keeps rear contents accessible and supports consistent layouts for organizers or dividers. The non-handed design described in the features means a single slide pattern works on either the left or right side, which simplifies inventory and reduces the chance of using an incorrect hand during repetitive mounting. A hold-in anti-rebound feature helps the drawer remain at the closed position once pushed fully shut, which is useful in installations where movement or slight out-of-level conditions could otherwise nudge drawers open. The recommended use of #10 x 5/8 inch Phillips flathead screws points installers to a screw size and head profile that seat properly in the slide holes, which supports a stable, flush fit between slide, cabinet side, and drawer box surfaces.
The Knape and Vogt 8810B 28 slides are recommended for drawers up to 42 inches wide, which helps when sizing wide storage drawers that still need smooth, supported travel.
The 8810B 28 slides use a side clearance of 3/4 inch plus 0.03 inch minus 0 inch, which guides drawer box sizing relative to the cabinet opening for proper alignment.
The product description lists a 200 lb rating, which indicates these slides are intended for heavy drawers where contents and drawer construction demand strong support.
The SAP description specifies full extension, so the 28 inch slides let the drawer extend to access storage at the back of the box.
The slides are identified as side mount, ball bearing slides, which means they install along the drawer sides and run on bearing members.
The Web Description lists #10 x 5/8 inch Phillips flathead screws as the recommended fasteners, guiding screw size and head style for mounting.
The Knape and Vogt 8810B 28 slide pairs a 28 inch full extension length with a 200 lb rating and side mount configuration, aligning with projects that need wide drawers up to 42 inches. The specified 3/4 inch side clearance and 2.09 inch height give precise drawer box dimensions to target during layout. Heavy-duty ball bearings, a non-handed design, and a hold-in anti-rebound feature support usable movement once the slides are in place. For builds that match these dimensions, load expectations, and side mount requirements, these 8810 series slides provide a defined hardware pattern to work into your next cabinet run.
Sold In: 4 Set
