Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt 8810 Series is a 24 inch full-extension side-mount ball bearing drawer slide rated 200 lb per pair, finished in zinc, and sold in a bulk pack for shops and installers working through multiple drawers at a time. With twice the load capacity of standard cabinet slides, it handles storage drawers, shop benches, and commercial cabinet work that would push a 100 lb slide past its limit.
Standard 100 lb cabinet slides cover most kitchen drawer work, but they fall short when a drawer is carrying real weight: a shop cabinet full of hand tools, a utility drawer loaded with fasteners, a commercial casework application where drawers are used hard every day. The 8810 Series is sized for exactly those jobs. Full extension means the rear of the drawer comes all the way out to the face of the cabinet, which matters when you need to reach the back of a deep tool box or a utility storage unit. The 24 inch slide length suits cabinet interiors in that depth range — slide length and drawer travel are separate specs, and on a full-extension design they track closely together.
The 8810 Series is cold-formed steel with a zinc finish — the workhorse combination for side-mount slides that spend their life inside a cabinet, doing load-bearing work out of sight. Zinc provides indoor corrosion resistance without the cost premium of stainless. It is a functional finish, not a decorative one, which is exactly right for a high-capacity slide that will be hidden beside a drawer box. The slide members are not handed, so the same part goes on either side of the drawer — no separate left and right SKUs to track, and no chance of pulling the wrong one from the bulk pack.
The bulk-pack format is aimed at cabinet shops, commercial installers, and facilities teams running multiple drawers through a single job — not a homeowner replacing one kitchen drawer. The 200 lb rating covers loaded shop benches, rolling tool storage, and heavy utility drawers in commercial and institutional settings. Note the 3/4 inch side clearance requirement per side: this slide needs more room than the standard 1/2 inch clearance, so drawer boxes for this series are built 1-1/2 inches narrower than the cabinet opening. In face-frame cabinets, rear mounting brackets are required to support the back of the slide; those brackets are sold separately and are series-specific.
Per pair. One pair of 8810 Series slides — one on each side of the drawer — carries 200 lb combined.
Neither. The 8810 is a standard-motion slide with no damper, no spring, and no detent. The drawer stays wherever it is left.
The source data does not state a maximum drawer width for the 8810 Series. Check the Knape and Vogt 8810 installation guide for the recommended width limit before building wide drawer boxes.
The slide itself works in both, but face-frame installs require rear mounting brackets to support the back end of the slide. Those brackets are sold separately and must match the 8810 Series — brackets from other series are not interchangeable.
Pack quantity is listed in the ordering details on this page. Bulk-Pack format is designed for shop and commercial volume — confirm the count before placing your order.
When the drawer is carrying real weight and full access to the back matters, the 8810 Series in zinc delivers the load rating, the extension, and the non-handed simplicity that keeps an install moving.
Sold In: 4 Set
