Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt 8810 series is a 26 inch full-extension side-mount ball bearing drawer slide rated 200 lb per pair, zinc finished, and designed for heavy storage, shop, and utility drawers that a standard 100 lb cabinet slide simply cannot handle. Sold in a bulk pack for volume installations.
The 8810 series belongs on drawers that exceed what kitchen cabinet slides are designed for. A shop tool drawer packed with hand tools, a garage storage cabinet loaded with hardware, a commercial cabinet carrying dense supplies — these are the loads where the 200 lb rating per pair provides working headroom rather than a theoretical ceiling. Full extension means the back of a 26 inch drawer comes all the way out, so nothing gets buried. The standard-motion design (no detent, no damper, no spring) keeps the mechanism straightforward, which suits work environments where simplicity and durability matter more than soft-close convenience.
The zinc finish on cold-rolled steel members gives these slides solid indoor corrosion resistance without the added cost of a decorative finish. On a slide that sits beside the drawer box and handles heavy working loads, zinc is the right call: it protects the steel through years of service and blends with painted, melamine, and plywood cabinet interiors. This is a functional, durable finish suited to the environments these slides are specified for. Not intended for wet, outdoor, or food-service washdown conditions.
Cabinet shops building heavy storage cabinets for garages, shops, or commercial spaces will find the 8810 a natural fit when drawers consistently carry loads above the 100 lb class. Contractors outfitting utility rooms, service counters, and back-of-house storage also rely on the 8810 to handle content weight that standard kitchen hardware cannot. The 26 inch length suits deeper drawers — measure the cabinet's interior depth before ordering to confirm fit. Because the slide requires 3/4 inch of side clearance per side, the drawer box needs to be built 1-1/2 inches narrower than the cabinet opening. In face-frame cabinets, rear mounting bracket support is needed at the back of the slide; those brackets are sold separately and must be matched to the 8810 series.
Per pair. Both slides together carry 200 lb — do not double that number by counting each slide separately.
The source data does not state a maximum drawer width for the 8810 series. For width limits, confirm against the Knape and Vogt 8810 catalog spec sheet before building wide drawers.
Yes — full extension brings the entire drawer to the cabinet face so the back of the box is reachable. The 26 inch figure is the closed slide length, not the travel distance.
It can, but face-frame installations need rear mounting brackets to support the back end of the slide. Those brackets are sold separately and must be matched to the 8810 series specifically.
The bulk pack designation indicates trade-quantity packaging. Check the pack quantity shown on the product page before placing a volume order.
When the drawer load exceeds what standard cabinet hardware is rated for, the 8810 series delivers the capacity, the full extension access, and the zinc durability to keep heavy-use installations running reliably for the long term.
Sold In: 4 Set
