Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PRO50 drawer member is a right hand side mount component from the Pro Value Series epoxy coated euro slides, designed as the drawer member for 3/4 extension self-close applications. This member is 14 inch length, which fits projects built around that slide size where stroke and clearances must match the cabinet layout. The member is white, aligning with projects that use light-colored hardware for a consistent look inside the cabinet. It is made from 1.2 mm cold rolled steel, epoxy coated, so the steel body provides strength while the coating helps the slide move smoothly in normal cabinet environments. The design is a single captive type with positive stop and lift out disconnect with self closing action, so the drawer travels under control, closes itself at the end of travel, and can still be lifted out when alignment or service work is required.
The drawer member uses bottom and side mounting holes on the drawer member, giving installers options when fastening along the drawer side or base to suit different box designs. Cabinet members in this PRO50 system use 32 mm mounting holes on the cabinet member, aligning with drilling patterns in face-frame and European applications so casework can follow established boring systems. Mounting space of 1/2 inch plus 1/32 inch or minus 0 inch clearance each side defines the side-to-side gap between drawer and opening, which directly affects how smoothly the 3/4 extension self-close action performs. The ANSI/BIFMA tested and approved to Grade 1 requirements designation means the slide system has been evaluated to that standard, supporting use where repeat cycles and consistent operation matter.
This PRO Value Series drawer member is part of Baer Supply's PRO50 epoxy coated euro slide family, which works in face-frame and European applications, giving flexibility across cabinet lines using different construction methods. Being a right hand drawer member, it serves the right side of the drawer box when paired with the matching cabinet and opposite drawer components in the PRO50 system. The white epoxy coated finish suits cabinets where a clean, light interior is preferred, such as kitchens, baths, and residential built-ins that favor white interior hardware. With a height of 1-1/2 inch, the slide sits compactly along the drawer side, helping avoid interference with drawer bottom grooves, under-mount components, or internal dividers in the box.
The single captive design with positive stop keeps the drawer guided throughout its 3/4 extension, which helps maintain consistent reveal and alignment across multiple drawers in a bank. Lift out disconnect with self closing action means the drawer can be removed vertically once extended, making it easier to access the slide and cabinet interior for adjustments or refinishing while still returning to the same track. The polymer wheel provides a rolling contact surface along the steel track, which supports quiet, trouble-free performance over time and helps reduce wear between moving parts during repeated cycles. Using a mounting space of 1/2 inch plus 1/32 inch or minus 0 inch clearance each side ties drawer sizing directly to the slide requirements, supporting consistent side clearances that let the 3/4 extension self-close mechanism operate smoothly from cabinet to cabinet.
The PRO50 right hand drawer member is 14 inch length, so it matches drawer and cabinet designs built around a 14 inch 3/4 extension slide stroke.
This drawer member is used with a mounting space of 1/2 inch plus 1/32 inch or minus 0 inch clearance each side, guiding drawer width relative to the cabinet opening.
The drawer member has bottom and side mounting holes on the drawer member, allowing fastening through the side or bottom of the drawer box.
This PRO50 member is part of a 3/4 extension self-close slide with single captive, positive stop, and lift out disconnect, guiding the drawer closed at the end of travel.
The drawer member is made from 1.2 mm cold rolled steel and epoxy coated in white, combining strength with a smooth operating surface and light interior color.
This PRO50 drawer member is ANSI/BIFMA tested and approved to Grade 1 requirements, supporting use where repeated drawer cycles are part of normal operation.
The Pro Value Series 4000-14-WT-DR right hand drawer member gives installers a 14 inch 3/4 extension self-close epoxy coated euro slide component that matches face-frame and European applications. With defined mounting space, 1-1/2 inch height, white epoxy coated 1.2 mm cold rolled steel construction, and polymer wheel design, it supports quiet, consistent drawer performance. For projects built around the PRO50 system, this drawer member helps align cabinet openings, drawer box sizing, and self closing action into a repeatable installation pattern.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO50RBN-R Mfr# EUSKT-1-R | PRO50 Series Rear Mounting Sockets, Right | ||||
Sold in: 1 Each |  DSPRO50RBN-L Mfr# EUSKT-1-L | PRO50 Series Rear Mounting Sockets, Left |
