Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PRO50 drawer member is a left hand side mount drawer member from the Pro Value Series, so it serves as the moving half of a 20 inch 3/4 extension self-close epoxy coated Euro slide in face-frame or European cabinet applications. The 20 inch length suits standard base cabinet drawer depths, letting drawers travel smoothly while keeping them supported throughout most of the opening. The self closing action pulls the drawer shut at the end of travel, which helps drawers seat consistently without manual pushing on every close. Quiet wheel operation keeps movement smooth, which is useful in residential or light commercial spaces where noise control matters. The epoxy coated finish on the 1.2 mm cold rolled steel provides a smooth running surface, supporting repeatable sliding motion over time. White color helps this member blend with light-colored cabinet interiors for a clean, finished look.
This PRO50 drawer member works in a side mount layout with 1/2 inch clearance on each side, with tolerance of plus 1/32 inch and minus 0 inch, so cabinet and drawer widths can be planned to that space for correct running clearance. The member height is 1-1/2 inches, which helps determine drawer side height and stack spacing in multi-drawer cabinets. Bottom and side mounting holes on the drawer member give flexibility in where fasteners are placed along the drawer side, which is useful when working around joinery or limited material. The 32 mm mounting holes on the cabinet member align with the standard 32 mm cabinet system, helping this member integrate into line-bored cases for straightforward layout.
The PRO50 drawer member is designed for both face-frame and European applications, so it can be used across different cabinet construction styles within the same job. In a face-frame run, the 20 inch length suits common box depths, supporting kitchen, bath, or utility drawers that need 3/4 extension travel for everyday access. In European frameless cabinets, the 32 mm mounting holes on the cabinet member align with system rows, supporting consistent hardware positioning from cabinet to cabinet. The side mount design works with drawer boxes that leave a 1/2 inch clearance per side, which is a standard planning dimension in many shop drawings and helps simplify layout when repeating a cabinet design. The white epoxy coated finish pairs well with white or light interior cases, helping the hardware visually recede while still delivering controlled movement.
The self closing action of this PRO50 drawer member draws the drawer shut at the final portion of travel, which helps doors and drawer fronts line up uniformly across a bank without constant adjustment. The polymer wheel used in the slide assembly provides a lifetime of quiet, trouble-free performance, so the rolling interface stays smooth and reduces noise throughout regular use. The positive stop feature keeps drawers from being over-extended, which limits stress on the member interface and helps maintain alignment over time. The lift out disconnect allows the drawer to be lifted free of the installed cabinet member, providing quick access for adjustments, refinishing, or replacing a front without disturbing case alignment. The 1.2 mm cold rolled steel construction gives the member a solid feel in the slide assembly, supporting stable movement under load when used within its tested ANSI/BIFMA Grade 1 performance range.
The PRO50 drawer member is part of a 3/4 extension self-close epoxy coated Euro slide, so it provides partial extension with automatic pull-in at the end of travel.
The PRO50 drawer member is 20 inches long, which sets drawer travel and suits standard cabinet depths that are planned around a 20 inch slide length.
This PRO50 drawer member is a left hand part, so it mounts on the drawer's left side in a side mount configuration when paired with the corresponding cabinet member.
The slide uses 1/2 inch clearance on each side, with tolerance of plus 1/32 inch and minus 0 inch, guiding cabinet and drawer width planning for smooth movement.
The 32 mm mounting holes on the cabinet member align with standard system boring, so layout on frameless cabinets follows familiar hole spacing.
The PRO50 drawer member uses 1.2 mm cold rolled steel with a white epoxy coated finish, giving a smooth running surface and clean interior appearance.
The PRO50 drawer member in left hand, 20 inch length, and white epoxy coated finish brings self closing action, quiet polymer wheel performance, and ANSI/BIFMA Grade 1 tested function to side mount Euro slide installations. The 1/2 inch side clearance, 1-1/2 inch height, and 32 mm cabinet mounting pattern support predictable layout in both face-frame and European cabinet construction. When a project calls for a 3/4 extension Euro slide with reliable self close behavior and a white interior look, this 4000-20-WT-DL drawer member lines up with those requirements for straightforward planning and repeatable drawer performance.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO50RBN-R Mfr# EUSKT-1-R | PRO50 Series Rear Mounting Sockets, Right | ||||
Sold in: 1 Each |  DSPRO50RBN-L Mfr# EUSKT-1-L | PRO50 Series Rear Mounting Sockets, Left |
