8092 4x4 Pocket Door Slide For Single Doors

8092 4x4 pocket door slide with baseplate from Knape and Vogt is a pocket door hardware component designed for single doors, so it handles doors that need to retract smoothly into a cabinet or enclosure. The 75 lb class rating supports heavy duty applications, which suits installations where doors carry weight such as wood slab or raised panel designs. The 13 inch slide length fits projects built around this specific size, helping layouts that are already dimensioned to that run. The ebony black finish gives the slide a dark appearance, which helps it visually blend in darker cabinets or equipment bays. As part of the 8092 series for single doors with hinge base plates attached to the slide bracket, this model fits jobs where that integrated hinge base plate approach is preferred.

Key Pocket Door Hardware Details For Projects

• The KV8092 pocket door slides are specified for single doors, which suits cabinetry or multimedia openings where one door needs to travel in and out of the pocket cleanly without pairing.
• The 75 lb class rating sets a defined load capacity, which matters when sizing door construction so weight, panel materials, and hardware stack stay within that class for consistent movement.
• Maximum recommended door dimensions of 72 inches tall by 26 inches wide guide door layout, helping keep proportions within a range that the slide system is designed to support.
• The dual rack and pinion system is designed to eliminate potential sag, so the connected motion of the door helps maintain alignment over the slide stroke instead of drifting at one end.
• Precision ball bearing slides provide smooth and quiet operation, which benefits installations in offices, residential spaces, or workrooms where noise and rough travel are concerns.
• Slides are available in lengths from 12 inches to 30 inches across the series, so the 13 inch option fits among a range that lets planners match pocket depth and door width across different cabinets.

Installation Details For 8092 Pocket Door Slide

The 8092 pocket door slides use a dual rack and pinion system between top and bottom slides, so motion at one slide is mechanically tied to the other, supporting synchronized travel during installation and use. Pinion shafts in 36 inch, 48 inch, or 72 inch lengths connect the top and bottom pocket door slides, which lets installers bridge the height of the door with a single linked drive. These shafts can be cut to exact length as needed, so the connection can be trimmed to match specific door heights within the system limits. The 8092 configuration uses hinge base plates attached to the slide bracket, which gives a defined interface location for door hinges during layout.

Using KV8092 Pocket Door Hardware In Cabinetry

Where This Pocket Door Slide Fits Best

The KV8092 pocket door slide belongs to Knape and Vogt pocket door hardware for shelf, closet, garage, multimedia, and workspace components, so it suits enclosures where a door needs to clear the opening and recess. Its design as a pocket door slide for a single door focuses it on cabinets or openings that use one door panel rather than a pair, which simplifies layout around one moving leaf. The 75 lb class rating supports heavier door builds that stay within that rating, so thicker materials, applied panels, or additional mounted components can be considered within that range. Maximum door dimensions of 72 inches tall by 26 inches wide define an upper envelope for door size, helping keep designs aligned with what the slide is meant to carry. The 13 inch slide length works where the pocket depth and door overlay are planned around that stroke, supporting smaller cabinets or shallow enclosures that still require a retracting door.

Details That Support Alignment And Repeatable Motion

The dual rack and pinion system is engineered to eliminate potential sag by linking the top and bottom pocket door slides, so as the door travels, both slides move together rather than acting independently. This linked motion helps keep the door square in the opening during extend and retract cycles, which matters for maintaining reveals and preventing edge rub. Pinion shafts in multiple lengths connect the slides and can be cut to exact length, so the installer can tune the connection to match the actual door height within the system range, supporting precise fit vertically. Precision ball bearing slides provide smooth and quiet operation, so the motion feels controlled and consistent from cycle to cycle, which is important for doors that will be opened and closed frequently. The hinge base plates attached to the slide bracket on the 8092 style give a defined hinge interface on the slide assembly, which organizes the stack of hardware where the door meets the slide and can reduce layout variability across similar cabinets.

Common Questions About KV8092 Pocket Door Slide

Selecting This 8092 Pocket Door Slide For Your Job

The Knape and Vogt 8092 4x4 pocket door slide with baseplate in ebony black combines a 75 lb class rating, dual rack and pinion linkage, and precision ball bearing slides to support single doors up to 72 inches by 26 inches. The 13 inch length positions this model within the broader 8092 range from 12 inches to 30 inches, so it fits projects laid out around that specific stroke. For cabinet, closet, garage, or multimedia openings that call for a retracting door in this size class, this slide provides defined load, motion, and dimension parameters to build around.