Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV 8092 pocket door slide is a Knape and Vogt pocket door slide system designed for a single door, giving you a controlled way to move a door into a cabinet or pocket. This model is a 14 inch slide length, so it suits applications built around that travel distance. The slide has a 75 lb class rating for heavy duty applications, so it handles doors within that load range for reliable movement. It is part of the KV8091/8092 family, so it follows the same pocket door hardware concept used across that series. The finish is ebony black, which blends into darker casework and helps the mechanism visually recede in multimedia or workspace cabinets. The slide is identified as KV8092, which means it uses hinge base plates attached to the slide bracket for a door-mounting interface.
The KV8092 pocket door slide provides top and bottom slides for a single door, giving the door guided travel into a pocket or cabinet opening. A dual rack and pinion system in this series eliminates any potential for sag, so the top and bottom slides stay synchronized as the door moves. Precision ball bearing slides provide smooth and quiet operation, which helps doors move predictably without chatter in use. Pinion shafts in 36 inch, 48 inch, or 72 inch lengths connect the top and bottom pocket door slides, so the motion of both slides is tied together across the door height. These shafts can be cut to exact length, allowing the installer to match the shaft to the door height within the maximum door dimensions.
The KV 8092 pocket door slide is part of a pocket door hardware system used in multimedia and workspace components, so it suits cabinets where doors need to retract fully. The KV8092 configuration provides pocket door slides for a single door at the top and bottom, so the door is guided along both edges for controlled travel. Maximum door dimensions in this series are 72 inches tall by 26 inches wide, setting a design envelope for door size when planning layouts. Within that range, the 75 lb class rating supports doors in heavier-duty applications, so you can specify substantial doors while staying inside the rating. The cassette roller KV8090 in the series is intended for raised panel doors, which ties this hardware family to more detailed door constructions often used in custom cabinetry.
The dual rack and pinion system used in these pocket door slides eliminates any potential for sag, so the top and bottom slides stay aligned and reduce the chance of the door tilting during movement. This synchronized motion keeps the door square to the opening throughout travel, which helps the edges track cleanly into the pocket. Precision ball bearing slides deliver smooth and quiet operation, so doors move with consistent resistance and reduced noise in repeated use. Pinion shafts in 36 inch, 48 inch, or 72 inch lengths connect the top and bottom pocket door slides, so the drive is transferred evenly between them over the full door height. Because these shafts can be cut to exact length, the shaft can be tailored to the actual door height within the stated maximum door dimensions for a better fit. The KV8091KIT-M hinge overlay kit belongs to the same series, tying hinge overlay setup to the pocket door slide geometry for coordinated alignment.
The KV 8092 pocket door slide belongs to a 75 lb class system with maximum door dimensions of 72 inches tall by 26 inches wide, guiding cabinet and media door sizing in that range.
The dual rack and pinion system in these pocket door slides eliminates any potential for sag, keeping top and bottom slides synchronized so the door tracks squarely during movement.
The KV8092 pocket door slides use hinge base plates attached to the slide bracket, providing defined hinge mounting points that tie the door position directly to the slide hardware.
The 75 lb class rating for heavy duty applications means the KV 8092 slide is intended for doors within that load level, supporting heavier cabinet or media doors in normal use.
Precision ball bearing slides provide smooth and quiet operation, so the pocket door moves predictably and with reduced noise when opening and retracting into the cabinet.
Pinion shafts offered in 36, 48, and 72 inch lengths connect the top and bottom slides and can be cut to exact length, allowing the linkage to match the door height within system limits.
The KV 8092 pocket door slide with baseplate, in a 14 inch length and ebony black finish, gives you a defined solution for single pocket doors in multimedia and workspace cabinetry. Its 75 lb class rating, dual rack and pinion system, and precision ball bearing slides support doors up to 72 inches tall by 26 inches wide within the stated performance class. Selecting this specific KV8092 model ties hinge base plates, slide motion, and shaft connection into one coordinated hardware approach.
Sold In: 1 Set