8092 4x4 Pocket Door Slide with Baseplate, 75lb Capacity, Ebony Black, 26
Description
8092 4x4 Pocket Door Slide For Heavy Doors
8092 4x4 pocket door slide with baseplate, 75lb capacity, ebony black, 26 is a Knape and Vogt pocket door slide designed for single door applications where the door needs to retract into a cabinet or enclosure. This model follows the KV8092 configuration, which provides top and bottom pocket door slides for a single door with hinge base plates attached to the slide bracket, so the hinge interface is already integrated into the slide assembly. As part of the KV 75 lb class rating system, it is specified for heavy duty applications where controlled movement of a door is important. The 26 inch slide length aligns with installations using doors up to the stated maximum dimensions of 72 inches tall by 26 inches wide within the 75 lb class rating range. The ebony black finish supports projects that call for a dark, unobtrusive hardware look around multimedia or workspace components.
Key Pocket Door Slide Details That Matter
- The KV8092 pocket door slides provide top and bottom slides for a single door, which keeps movement synchronized along both edges of the door and supports consistent travel in and out of the cabinet opening.
- Hinge base plates are attached to the slide bracket in the KV8092 configuration, so the hinge connection point is already part of the slide assembly and helps align the door's hinge locations with the sliding hardware.
- This series is part of a 75 lb class rating for heavy duty applications, tying the hardware selection directly to doors and fronts that fall within this load requirement in multimedia and workspace installations.
- Maximum door dimensions for the 75 lb class rating are 72 inches tall by 26 inches wide, which guides door sizing so weight and door span work within the slide's intended operating range.
- Slides come in lengths from 12 inches to 30 inches across the series, which allows selection of a slide length that suits the cabinet depth and the door size defined for the project layout.
Installation Roles Of Slide, Baseplate, And Shafts
The KV8092 pocket door slide with hinge base plates attached to the slide bracket is specified as a top and bottom slide system for a single door, so both slide tracks work together to carry and guide the door. Within the KV8091/KV8092 system, pinion shafts in 36, 48, or 72 inch lengths connect the top and bottom pocket door slides, and those shafts can be cut to exact length as needed, which lets the installer match the connection distance to the cabinet width and layout. Dual rack and pinion system construction eliminates any potential for sag in the connected slides by coordinating movement between the upper and lower tracks. Precision ball bearing slides provide smooth and quiet operation as the door moves in and out, which supports controlled motion in multimedia and workspace components where frequent access is expected.
How This Pocket Door Hardware Works In Use
Where The 26 Inch 8092 Slide Fits Best
The 8092 4x4 pocket door slide with baseplate, 75lb capacity, ebony black, 26 is part of the Knape and Vogt pocket door hardware line listed under pocket door slides for multimedia and workspace components. Within this group, the KV8092 designation defines a pocket door slide set with top and bottom slides for a single door and hinge base plates attached to the slide bracket, which positions it for cabinet or enclosure doors that need both sliding retraction and a hinge interface. The 75 lb class rating for heavy duty applications, combined with maximum door dimensions of 72 inches tall by 26 inches wide, aligns this slide with medium to large doors that still remain within these dimensional limits. The ebony black description ties directly to projects where dark hardware is preferred around shelves, closets, or workspace installations using pocket door mechanisms.
Details That Support Alignment And Repeatable Motion
Within the KV8091/8092 family, the KV8092 pocket door slides are used with pinion shafts in 36, 48, or 72 inch lengths that connect the top and bottom pocket door slides, which links the two tracks so the door moves evenly. These pinion shafts can be cut to exact length as needed, allowing the installer to set the connection distance precisely to the cabinet or enclosure width specified in the job. The series uses a dual rack and pinion system that eliminates any potential for sag by coordinating the movement between the upper and lower slides, so the door stays aligned as it retracts. Precision ball bearing slides provide smooth and quiet operation, which supports doors that open and close repeatedly in multimedia or workspace environments without harsh movement. The 8092SP EB 26 part number identifies this specific 26 inch ebony black configuration within the overall Knape and Vogt pocket door slide system, helping match replacement or additional slides to existing hardware on site.
Common Questions About This Knape And Vogt Slide
What type of door setup is the KV8092 slide intended for?
The KV8092 pocket door slides are top and bottom slides for a single door, so they are intended for applications where one door retracts into a pocket within a cabinet or enclosure.
How does the dual rack and pinion system affect door movement?
The dual rack and pinion system connects the slides to eliminate any potential for sag, which keeps the door aligned and allows coordinated travel between the upper and lower tracks during operation.
What door size and weight range does this slide support?
This pocket door slide belongs to a 75 lb class rating with maximum door dimensions of 72 inches tall by 26 inches wide, guiding which door sizes and weights fall within its intended use range.
How are the hinge connections handled on the KV8092 model?
On the KV8092 pocket door slides, hinge base plates are attached to the slide bracket, providing an integrated hinge connection point within the sliding hardware assembly for the door.
What role do the pinion shafts play in this slide system?
Pinion shafts in 36, 48, or 72 inch lengths connect the top and bottom pocket door slides, and they can be cut to exact length to match the cabinet width and maintain synchronized door movement.
What is the benefit of precision ball bearing slides here?
Precision ball bearing slides in this pocket door system provide smooth and quiet operation, which is useful for multimedia and workspace components that require frequent, controlled access to the enclosed area.
Selecting This 26 Inch Ebony Black Slide
The 8092 4x4 pocket door slide with baseplate, 75lb capacity, ebony black, 26 ties directly to the KV8092 single door slide system with integrated hinge base plates, a 75 lb class rating, and a 26 inch length suited to doors within the 72 inch by 26 inch maximum size. For projects involving multimedia and workspace components or other pocket door hardware applications where a door retracts into a cabinet, this Knape and Vogt configuration aligns slide function, load rating, and finish in one defined part. Use the 8092SP EB 26 designation to match this 26 inch ebony black model when planning new layouts or coordinating with existing Knape and Vogt pocket door installations.
