8092 4x4 Pocket Door Slide with Baseplate, 75lb Capacity, Ebony Black, 20
Description
20 Inch Pocket Door Slide For Heavy Doors
20 inch pocket door slide describes this Knape and Vogt 8092 4x4 Pocket Door Slide with Baseplate, giving a defined length for planning cabinet or enclosure layouts. As a pocket door hardware component, it supports doors that retract into a cabinet, freeing the opening for access. The 75 lb class rating ties the slide to heavy duty applications where the door weight stays within that load, which matters when choosing hardware for solid or raised panel doors. Top and bottom slide design for a single door means the hardware guides the door from both edges, helping the door travel square in and out of the pocket. Ebony black finish provides a dark appearance that coordinates with similar hardware and can visually recede inside the pocket. The manufacturer part number 8092SP EB 20 identifies this specific 20 inch ebony black configuration for repeat ordering.
Key Pocket Door Slide Details For Projects
- The 8092 pocket door slides are described as top and bottom slides for a single door with hinge base plates attached to the slide bracket, so the slide system both carries the door and provides a mounting interface for hinged connection, simplifying door movement into a pocket.
- The 75 lb class rating for heavy duty applications sets a clear load expectation, so doors up to that class can be matched to the slide without overloading the rack, pinion, or ball bearing components during repeated cycles.
- Maximum door dimensions of 72 inches tall by 26 inches wide define an envelope where the slide system is intended to operate, helping projects stay within a size range where the door can travel into the pocket while remaining supported.
- Dual rack and pinion system is stated to eliminate potential for sag, which means the top and bottom slides stay synchronized and help keep the door aligned in the opening instead of drooping over time.
- Precision ball bearing slides provide smooth and quiet operation, so doors move more easily along the track and generate less noise, which is useful for multimedia cabinets, workspace components, or closet applications.
Installation Roles In The Pocket Door Assembly
Knape and Vogt pocket door slide model 8092 is identified as top and bottom pocket door slides for a single door with hinge base plates attached to the slide bracket, so installation treats this component as both the movement track and the hinge base interface. The web description notes that pinion shafts in 36 inch, 48 inch, or 72 inch lengths connect top and bottom pocket door slides for the system, and that these shafts can be cut to exact length as needed, so the installer tailors the connecting shaft to the cabinet width while keeping the rack and pinion engaged across the opening. The 20 inch slide length factors into cabinet depth, allowing planning of the pocket depth and ensuring the door can retract fully within that space.
Using This 8092 Pocket Door Slide In Practice
Pocket Door Slide Application In Cabinet Runs
The category listing of Shelf, Closet & Garage Organization and Multimedia and Workspace Components positions this 8092 pocket door slide within storage and equipment environments, so projects like closets, garages, and workstations can use retracting doors to clear access space. As pocket door hardware, the slide supports doors that move into a side pocket rather than swinging out, which can matter where front clearance is limited. Maximum door dimensions of 72 inches tall by 26 inches wide clarify the intended envelope for a single door, guiding cabinet and face-frame design so the opening and pocket depth correspond to the slide capability. The 75 lb class rating for heavy duty applications aligns with doors that carry some weight, giving a basis to assign the slide to solid fronts or raised panel designs within that range. In this context, the 20 inch length allows doors to retract a substantial distance into the pocket, coordinating with cabinet depth and interior components.
Slide Features That Support Alignment And Motion
The dual rack and pinion system is specifically described as eliminating any potential for sag, so the installer gains synchronized movement between the top and bottom slides, keeping the door better aligned vertically as it travels. Pinion shafts in 36 inch, 48 inch, or 72 inch lengths connect the top and bottom pocket door slides, and these shafts can be cut to exact length as needed, which lets the shaft span match the cabinet opening while retaining coordinated motion between racks. Precision ball bearing slides are noted for smooth and quiet operation, so doors glide rather than bind, reducing effort and sound when doors are opened or closed repeatedly. The 8092 designation indicates pocket door slides with hinge base plates attached to the slide bracket, meaning the bracket not only guides the slide but also anchors hinge base plates, creating a defined path from hinge line to slide track for consistent operation. Ebony black finish gives the slide a dark appearance, helping the hardware visually blend into darker interiors and reducing distraction when the door is open.
Common Questions About This 20 Inch Pocket Slide
What doors can use this 75 lb pocket door slide?
The 8092 4x4 Pocket Door Slide with Baseplate is described for heavy duty applications with doors up to 75 lb and maximum door dimensions of 72 inches tall by 26 inches wide.
How does the dual rack and pinion pocket slide help alignment?
The 8092 pocket door slide uses a dual rack and pinion system that is stated to eliminate potential sag, so the top and bottom slides move together and help keep the door square.
What role do the pinion shafts play with this slide?
The web description notes that pinion shafts connect the top and bottom pocket door slides and can be cut to exact length, so they transmit motion across the cabinet opening.
What identifies this slide as the ebony black 20 inch model?
The manufacturer part number 8092SP EB 20, the SAP description 20' FLIPPER SLIDE, BLACK, and the product name details identify this as the 20 inch ebony black configuration.
How does the ball bearing construction affect door movement?
The precision ball bearing slides are described as providing smooth and quiet operation, so the door travels more easily along the track and produces less noise.
Where is this pocket door hardware commonly applied?
The category placement under Shelf, Closet & Garage Organization and Multimedia and Workspace Components points to use on storage, closet, garage, and workspace doors.
Selecting This Slide For Pocket Door Projects
The 8092 4x4 Pocket Door Slide with Baseplate in 20 inch length, ebony black finish, and 75 lb class rating gives a defined combination of size, appearance, and capacity for pocket door projects. Dual rack and pinion design, precision ball bearing action, and top and bottom slide layout tie this hardware to applications where door alignment and smooth travel matter. Using the specific 8092SP EB 20 part number connects future orders back to the same 20 inch Knape and Vogt pocket door slide configuration.
