Square Booth Legs, Brushed Steel 4" - 4 Pack

Square Booth Legs Brushed Steel For Stable Support

Square Booth Legs brushed steel are 2 x 2 inch (51mm x 51mm) square table legs designed to support work surfaces and tables, so they provide a defined footprint that suits compact booth and counter layouts. The 4 inch height option keeps surfaces low, which helps where bench or booth seating demands a modest rise off the floor. With 4 inch, 6 inch, and 8 inch heights available, a shop can match leg height to different counter or banquette designs while keeping the same mounting details. Each leg has a weight capacity of 220 lb., so a bank of legs under a run of seating or a small table can handle typical loads without relying on oversize components. The brushed steel finish gives the legs a uniform appearance, which matters when they are visible along toe spaces or open booth bases.

Key Square Booth Leg Details That Matter

• The 2 x 2 inch (51mm x 51mm) square leg profile creates a compact footprint that fits tight booth bases while still presenting a solid stance under work surfaces.
• Heights of 4 inch, 6 inch, and 8 inch are available, allowing builders to match different seating or counter heights while staying with the same leg style across a project.
• A 1 inch height adjustment range lets installers fine-tune each leg, which helps level tops on uneven floors without reworking frames or shimming extensively.
• The 4 x 4 inch (101mm x 101mm) welded steel top plate provides a broad mounting surface, spreading load into the work surface or subframe for better stability.
• Two finish options are available, so projects can align the leg appearance with surrounding casework and metals for a consistent finished look.
• A weight capacity of 220 lb. per leg supports substantial static loads, which lets designers calculate leg counts confidently for booth runs and workstations.

Installation Details For These Square Table Legs

These 2 x 2 inch (51mm x 51mm) square table legs use a welded 4 x 4 inch (101mm x 101mm) steel top plate, so installers have a flat steel surface to fasten directly to frames or underside panels. The welded construction keeps the top plate fixed in relation to the leg, which helps maintain alignment when setting multiple legs to the same edge. With 1 inch of height adjustment built in, installers can dial in final elevation across all legs to bring a work surface into plane, even when floors vary from point to point. The short 4 inch height works well for low platforms or booth bases, while the same product line offers 6 inch and 8 inch heights to cover higher seating or compact table applications.

Using Peter Meier Booth Legs In Real Projects

Where These 2 x 2 Square Legs Fit Best

The Peter Meier, Inc. Square Booth Legs are part of a table leg line for work surfaces and tables, so they suit commercial and shop environments where stable support under compact surfaces is needed. The 2 x 2 inch (51mm x 51mm) leg size fits under narrow booth bases and small tops without crowding foot space, which matters when laying out seating where every inch of clearance counts. With 4 inch, 6 inch, and 8 inch heights available, the same 2 x 2 profile can be used under low lounge-style booth platforms, standard booth seating, or short utility tables, giving projects a unified look. The brushed steel finish on this version presents a clean metal surface, which works in exposed-leg designs or behind modesty panels where a finished appearance is still visible from certain angles. Because each leg is rated at 220 lb., designers can distribute legs along a bench or small counter knowing that each support contributes a predictable share of the total static capacity.

Details That Support Level, Repeatable Installations

The welded 4 x 4 inch (101mm x 101mm) steel top plate on these legs creates a square mounting pattern that aligns easily to corner blocks or subframes, helping installers repeat the same layout across multiple booths or tables. That welded connection keeps the leg square to the mounting plane, which reduces twisting during use and helps tops stay aligned over time. The 1 inch height adjustment built into the leg lets installers set an approximate height from the frame design, then fine-tune each point of contact to bring the surface into level without cutting leg stock. This adjustment range also assists when tying several legs into a continuous run, such as a booth line, because each leg can be set to match a reference elevation along the entire length. The 220 lb. per-leg capacity supports dense tops or concentrated loads at corners, so fewer design compromises are needed when choosing top materials within typical weight ranges. With finishes available across this leg line, projects can specify brushed steel here and complementary finishes on related pieces while retaining the same structural geometry.

Common Questions About Square Booth Legs Brushed Steel

Choose These Booth Legs For Consistent Support

The Square Booth Legs brushed steel, with their 2 x 2 inch (51mm x 51mm) profile and 4 x 4 inch (101mm x 101mm) welded steel top plate, give installers a defined mounting interface that carries up to 220 lb. per leg. The 1 inch height adjustment and multiple available heights in the same leg line help shops handle different booth and table elevations while keeping a consistent geometry. For projects that rely on repeatable layouts and compact, stable supports, this Peter Meier, Inc. leg design from Wurth Baer Supply offers a clear, specification-driven option.