Square Booth Legs, Brushed Steel 6" - 4 Pack

Square Booth Legs Brushed Steel 6 Inch For Tables

Square booth legs brushed steel 6 inch from Peter Meier, Inc. are 2 inch x 2 inch (51mm x 51mm) square legs designed to support work surfaces and tables, so they provide a defined support footprint that suits booth seating and fixed table layouts. Each leg is rated for a weight capacity of 220 lb. per leg, which supports heavier tops in commercial or residential installations where consistent stability is needed at every corner. The legs feature 1 inch height adjustment, allowing fine-tuning of finished height to help match existing seating or compensate for minor floor variations during layout. A 4 inch x 4 inch (101mm x 101mm) welded steel top plate ties the leg to the underside of the work surface, creating a broad mounting area that spreads load and helps reduce stress at the connection point. The brushed steel finish offers a clean, neutral look that coordinates with many work surface and table designs while maintaining a consistent project appearance.

Key Table Leg Details That Support Projects

• The 2 inch x 2 inch (51mm x 51mm) square leg profile presents a compact but defined footprint that suits booth runs and fixed tables where legs must sit close to seating edges without wasting space.
• Available 4 inch, 6 inch, and 8 inch heights give options for different work surface and table designs, so one leg family can be used across low, mid, and slightly taller applications in the same project line.
• The 1 inch height adjustment built into each leg provides a small but useful range for leveling, so tops can align across uneven floors and adjoining sections without cutting material.
• The 4 inch x 4 inch (101mm x 101mm) welded steel top plate creates a broad interface with the underside of the top, helping distribute weight and reduce pressure points where the leg meets the work surface.
• A weight capacity of 220 lb. per leg supports substantial static loads at each support point, which matters for dense tops or frequent use environments where tables remain under load.
• Availability in 2 finishes allows the legs to coordinate with different design schemes, so the same structural layout can be matched to varying visual preferences or job specs.

Installation Height And Mounting Plate Details

These Peter Meier, Inc. square booth legs in 6 inch height use a welded steel 4 inch x 4 inch (101mm x 101mm) top plate, so the mounting area is clearly defined for positioning on the underside of work surfaces and tables. The 1 inch height adjustment allows the installed height to be dialed in after the legs are fastened, which is useful when aligning multiple tables in a run. The 2 inch x 2 inch (51mm x 51mm) square profile provides a straightforward reference when laying out legs at corners or along support rails. With 220 lb. weight capacity per leg, the mounting interface is specified for substantial support in typical work surface and table applications.

How These Square Table Legs Fit Real Projects

Where Square Booth Legs Brushed Steel 6 Inch Work Best

These 2 inch x 2 inch (51mm x 51mm) square legs in 6 inch height sit in the work surface and tables segment, making them suitable where a low support height is required, such as booth platforms or low work surfaces built into seating layouts. The brushed steel finish pairs with many table and work surface materials, helping projects maintain a consistent, neutral metal tone from leg to leg. With 4 inch, 6 inch, and 8 inch heights available in the same square leg design, these legs support projects that mix different surface heights while keeping a uniform leg style. The 4 inch x 4 inch (101mm x 101mm) welded steel top plate suits rectangular mounting zones on undersides of tops, which helps when multiple legs must align along rails or perimeter framing.

Why These 2 x 2 Square Table Legs Support Repeatable Results

The 1 inch height adjustment built into each leg allows installers to fine-tune elevation without modifying the leg body, which supports repeatable results across multiple installations using the same 6 inch leg. Because each leg carries a 220 lb. weight capacity, layouts can be planned using known per-leg support values, simplifying decisions about how many legs to place under larger or heavier tops. The welded 4 inch x 4 inch (101mm x 101mm) steel top plate provides a fixed, square reference that speeds layout when marking positions under a series of tables. The 2 inch x 2 inch (51mm x 51mm) square profile also simplifies alignment to table edges, since its flat faces can be set parallel to surface edges. Together, the consistent height options, defined adjustment range, and specified weight capacity support repeatable, predictable performance for work surface and table projects built around the 350-15-ST square booth legs.

Common Questions About 350-15-ST Square Booth Legs

Select Square Booth Legs For Your Next Table Run

The Peter Meier, Inc. Square Booth Legs, Brushed Steel 6 inch set, part number 350-15-ST, combines a 2 inch x 2 inch (51mm x 51mm) leg profile, welded 4 inch x 4 inch (101mm x 101mm) top plate, and 1 inch height adjustment to support planned work surface and table layouts. With a 220 lb. weight capacity per leg and multiple height options in the same square leg family, these legs help standardize support details across projects. Use this 4-leg set when a defined 6 inch leg height, adjustable leveling, and brushed steel finish are required for booth seating or similar fixed table installations.