Square Booth Legs, Brushed Steel 8" - 4 Pack

Square Booth Legs Brushed Steel For Work Surfaces

Square booth legs brushed steel define this Peter Meier, Inc. solution for supporting work surfaces and tables in a straightforward, square-profile design. The 2 inch x 2 inch, or 51mm x 51mm, square leg size creates a uniform footprint that fits typical booth and table layouts where straight lines and tight clearances matter. The 8 inch height option offers a low-profile support point that suits fixed-height booth bases or low work surfaces. A weight capacity of 220 lb. per leg provides a clear load reference so installers can plan support locations for heavier tops. The welded steel construction at the top plate ties each leg solidly to the mounting interface. The brushed steel finish gives a consistent appearance along the leg, which keeps visible support points visually aligned in restaurant or shop environments.

Key Square Booth Leg Details For Projects

• The 2 inch x 2 inch (51mm x 51mm) square leg profile presents a compact, right-angle support that fits against straight cabinet or bench lines, which simplifies layout where legs sit close to base panels or plinths.
• Available 4 inch, 6 inch, and 8 inch heights give installers options for different base elevations, so the same leg style can be matched across mixed-height booth seating or low work surfaces.
• The 1 inch height adjustment range lets each leg be fine-tuned on site, which helps level a top when floors are uneven without changing the basic leg height specification.
• The 4 inch x 4 inch (101mm x 101mm) welded steel top plate provides a broad mounting surface, spreading load into the underside of the work surface and supporting stable attachment points.
• The stated weight capacity of 220 lb. per leg sets a clear loading guideline, which helps determine leg quantity and placement under heavier tops or concentrated loads.
• The brushed steel finish offers a uniform metallic appearance along the leg, which supports a consistent look where the legs remain visible around booth perimeters.

Installation And Height Adjustment For These Legs

The 4 inch x 4 inch welded steel top plate creates a defined mounting zone that aligns easily to layout marks on the underside of a work surface or table frame. Because the plate dimensions are given as 101mm x 101mm, installers can plan screw patterns and edge clearances around that exact square area. The 1 inch height adjustment built into the leg allows final leveling between the floor and the work surface after the top is fastened to the plates. Using the 2 inch x 2 inch leg profile as a visual reference makes it straightforward to align multiple legs along straight edges so they sit parallel to cabinet or booth bases. The 8 inch height choice sets the basic elevation for the support point while the adjustment range covers minor site variations without altering the fixed layout.

Using These Square Booth Legs In Real Jobs

Where These 2 x 2 Square Table Legs Fit

The 2 inch x 2 inch square leg size lines up well with straight-edged work surfaces, booth bases, and table frames, so legs can sit tight to corners or run inboard from edges without interfering with adjacent structures. The 8 inch height option suits low-support applications such as booth bases or short risers, where the work surface sits close to a platform or substructure. Because the top plate is 4 inch x 4 inch (101mm x 101mm), each mounting zone occupies a predictable footprint, which simplifies spacing the legs under rectangular or square tops. The brushed steel finish coordinates across all legs, which keeps exposed supports visually consistent along a seating run or bank of low tables. With available 4 inch, 6 inch, and 8 inch heights, a project can use the same style across different levels while maintaining consistent leg geometry.

Details That Support Level, Repeatable Installations

The 1 inch height adjustment allows installers to trim final leg length on site, which helps bring a run of booth tops or work surfaces into the same plane even when the floor has slight variations. The 220 lb. per leg weight capacity gives a direct number for planning support under heavier work surfaces, so leg count and spacing can be laid out around that known rating. The welded steel top plate connects each 2 inch x 2 inch leg to the work surface with a solid, integrated joint, which reduces flex at the interface where loads transfer into the top. Having the top plate and leg welded as one steel assembly means the 4 inch x 4 inch mounting area stays square to the leg, helping legs stand plumb when the plate is aligned correctly. Across multiple legs, the consistent dimensions and adjustment range simplify reproducing the same setup on repeated booths or tables in a run.

Common Questions About These Square Booth Legs

Selecting These Legs For Your Next Installation

The combination of a 2 inch x 2 inch square profile, 8 inch height, and 1 inch height adjustment positions these legs as a practical choice for low booth or work surface supports. The 4 inch x 4 inch welded steel top plate and 220 lb. per leg rating establish both the mounting footprint and load reference for planning layouts. The brushed steel finish and consistent dimensions help repeated installations look and perform the same across multiple stations or booths. For projects that call for square, steel table legs in 4 inch, 6 inch, or 8 inch heights, this Peter Meier, Inc. option aligns well with straightforward, repeatable setups.