Square Booth Legs, Matte Black 6" - 4 Pack

Square Booth Legs Matte Black 6 Inch For Tables

Square Booth Legs Matte Black 6 inch from Peter Meier, Inc. are 2 inch x 2 inch (51mm x 51mm) square steel legs designed to support booth or work surfaces, giving installers a defined footprint that simplifies planning and layout on commercial seating or table runs. The 6 inch height option creates a low-profile base that keeps surfaces at a controlled elevation, which matters when matching adjoining runs or existing cabinetry. The matte black finish provides a neutral, low-glare appearance that blends with many interior schemes, helping projects maintain a consistent look across multiple installations. Sold in sets of 4 legs per box according to the web description, this configuration aligns with common table corner layouts, so one set can support a typical rectangular surface with even load distribution. The branded Peter Meier, Inc. product identity helps tie leg selection to recognized table hardware lines on repeat jobs.

Key Square Leg Details That Support Installers

• The 2 inch x 2 inch (51mm x 51mm) square leg profile creates a defined, stable footprint under the surface, which helps keep booth and table corners tracking square during layout and fastening on site.
• Available 4 inch, 6 inch, and 8 inch heights give fabricators options to hit different finished surface elevations using the same leg series, simplifying ordering when multiple counter or booth levels appear on a project.
• The 1 inch height adjustment range built into each leg provides vertical tolerance, which helps installers level work surfaces on uneven floors while keeping the design within its intended height band.
• The 4 inch x 4 inch (101mm x 101mm) welded steel top plate spreads load into the underside of the surface, which supports more secure fastening and reduces concentrated stress at any single fastener location.
• A weight capacity of 220 lb per leg allows designers to calculate support for typical work surfaces, so four legs can be aligned to carry substantial loads when layout places one leg at each corner.
• Two finish options noted in the web description give project planners aesthetic flexibility while staying within one leg system, which simplifies matching legs across different spaces in the same job.

Table Leg Mounting And Height Adjustment Details

The 4 inch x 4 inch (101mm x 101mm) welded steel top plate creates a broad interface against the underside of the work surface, which gives installers a clear mounting zone and helps resist racking when tables are moved or bumped in service. The 1 inch height adjustment range allows the 6 inch leg to cover slight floor variations, which is useful in remodel work where subfloors may be out of level between walls or between old and new slab areas. The 2 inch x 2 inch (51mm x 51mm) square tube format keeps the leg sides parallel to table edges, which can help align trim, bases, or toe details along the same lines for a cleaner visual result.

Using These Square Booth Legs In Real Projects

Where These Square Table Legs Fit Best

The 2 inch x 2 inch (51mm x 51mm) Square Booth Legs, Matte Black 6 inch, sit in the work surface and tables category, so they are well suited for fixed booths, low tables, or platforms where a compact leg height is required below seating or countertop structures. Their weight capacity of 220 lb per leg supports applications where a single rectangular surface is anchored on four corners, which works well for many restaurant tables, workstations, or similar fixtures that must carry normal service loads. Because heights of 4 inch, 6 inch, and 8 inch are available in the same square leg line, shops can select the 6 inch variant where intermediate elevation is needed, then use the shorter or taller versions elsewhere while holding the same 2 inch x 2 inch visual profile. The matte black option from Peter Meier, Inc. gives designers a darker base tone that can visually recede under tops, which helps highlight surface materials while keeping the support structure consistent throughout the space.

Why These Details Support Repeatable Install Results

The welded steel 4 inch x 4 inch (101mm x 101mm) top plate gives installers a predictable, rigid connection point every time, which helps keep bolt or screw patterns consistent from table to table and speeds layout on production runs. The 1 inch height adjustment makes it easier to dial in level conditions across a row of booths, as installers can fine-tune each leg rather than compensating with shims, reducing rework and helping tops line up cleanly edge-to-edge. With a 220 lb per leg weight capacity, designers can calculate support loads confidently, which reduces guesswork when assigning leg counts under larger surfaces. The 2 inch x 2 inch (51mm x 51mm) square shaft keeps each leg oriented without rotation-sensitive profiles, which simplifies alignment along framing members or edge reveals. The fact that the legs are sold in sets of 4 legs per box, as stated in the web description, matches common rectangular layouts, which streamlines ordering quantities for projects based on the number of similar tables or booth sections required.

Common Questions About Square Booth Leg Use

Selecting These Legs For Your Next Table Run

The Square Booth Legs, Matte Black 6 inch, combine a 2 inch x 2 inch (51mm x 51mm) square profile, welded 4 inch x 4 inch steel top plate, 1 inch height adjustment, and 220 lb per leg capacity to support booth and table projects with predictable performance. Matching 4 inch, 6 inch, and 8 inch height options in the same line let shops standardize on one square-leg look across varied elevations. Use this Peter Meier, Inc. leg set when you want a defined, matte black support that ties together layout, leveling, and load capacity across multiple similar surfaces.