Square Booth Legs, Matte Black 8" - 4 Pack

Square Booth Legs 8 Inch For Work Surfaces

Square Booth Legs 8 inch from Peter Meier, Inc. provide 2 inch x 2 inch square steel support for work surfaces and tables, so each leg carries predictable load and keeps layouts consistent across multiple installations. The matte black finish delivers a dark, neutral appearance that blends with many work surface designs, helping projects maintain a uniform look across a run of booths or tables. The 8 inch height sets a compact support profile, which helps when a low overall table height or stepped platform design is required. A stated weight capacity of 220 lb. per leg establishes how much each support is rated to hold, which matters when planning overall table load across four or more legs on a job. The product is categorized as table legs in the work surface and tables group, so it fits typical bench, booth, and table support applications.

Key Details That Support Table Projects

• The 2 inch x 2 inch (51mm x 51mm) square leg profile creates a straight, uniform post that aligns cleanly under rectangular or square tops, which helps installers lay out legs on centerlines and maintain consistent reveals.
• Available 4 inch, 6 inch, and 8 inch heights let the same square leg style serve different build-ups or platform heights, so fabricators can match leg height to project drawings while keeping a consistent visual across a space.
• The 1 inch height adjustment built into the design gives vertical play for leveling, which helps installers correct for floor variation and dial in final work surface height without reworking the understructure.
• The 4 inch x 4 inch (101mm x 101mm) welded steel top plate presents a broad, fixed mounting surface, which spreads load into the underside of the top and supports a stable connection point at each leg location.
• A weight capacity of 220 lb. per leg defines a clear load rating, which helps planners calculate total support across four or more legs when sizing tables for occupants, equipment, or typical restaurant traffic.
• Availability in two finishes offers a limited but clear finish choice, which lets designers coordinate the leg color with surrounding casework or seating while using the same structural format.

Installation And Height Adjustment For These Legs

The welded 4 inch x 4 inch steel top plate gives each leg a flat, square interface to the underside of a work surface, which simplifies layout because installers can align plate edges to top edges or reference lines. The 2 inch x 2 inch square leg body runs straight down from the plate, which keeps the footprint tight and helps locate legs close to corners or support rails. The 1 inch height adjustment feature provides a built-in way to fine-tune final height, which is useful when floors vary or when multiple tables must sit at the same working level across a room. The stated 8 inch leg height defines the nominal starting point before adjustment, so field crews can plan finished dimensions and toe space relative to flooring and seating.

Using Peter Meier Booth Legs In Real Projects

Where These Square Booth Legs Fit Best

The Square Booth Legs, Matte Black 8 inch set is defined as table legs in the work surface and tables category, which positions them for use under restaurant booths, fixed tables, and similar work surfaces. The 2 inch x 2 inch (51mm x 51mm) square leg size suits straight, linear layouts where a uniform post appearance matters, such as rows of seating or bench-style tables. With a weight capacity of 220 lb. per leg, a typical four-leg layout supports substantial static load, which is important when tops carry guests, dishes, or light equipment. The 8 inch height works in applications needing a low support rise, which can align with built-up bases or platforms shown on project drawings in hospitality or commercial millwork. Availability in two finishes gives designers a controlled set of options, so they can match the leg finish to booth bases or trim while holding the same leg geometry throughout a project.

Details That Help Consistent Results On Site

The welded 4 inch x 4 inch (101mm x 101mm) steel top plate fixes the connection between leg and plate, which removes play at that joint and helps keep the upper interface square during mounting. Because the plate is square, field teams can orient legs either way without changing edge distances, which speeds layout when repeating the same pattern across multiple tops. The 1 inch height adjustment allows legs to be set slightly higher or lower than nominal 8 inches, which helps align adjacent tables so their work surfaces meet at the same elevation even on uneven floors. The 2 inch x 2 inch square leg body also presents flat faces, which can visually line up with base trims or framing lines drawn in the millwork package. The 220 lb. per leg rating gives engineers and planners a straightforward number to use when counting legs under a top, which supports predictable performance once the tables or booths are in daily use.

Common Questions About 2 x 2 Square Booth Legs

Select Square Booth Legs Matched To Your Layout

The Square Booth Legs, Matte Black 8 inch with 2 inch x 2 inch columns, 4 inch x 4 inch welded steel top plates, and 1 inch height adjustment give installers defined dimensions and load ratings for planning work surfaces. The 220 lb. per leg weight capacity and table leg classification help match leg count and placement to restaurant booths, counters, or other fixed tops. Using the 8 inch height option alongside the other available heights lets fabricators keep a consistent leg style across different platform elevations. For projects requiring square, matte black support under work surfaces, this Peter Meier, Inc. model 350-20-BK offers a clearly specified solution ready to integrate into booth and table layouts.