Knape and Vogt 26 inch soft close drawer slides give a 26 inch full extension action, so the drawer travels its full length for clear access to stored items in cabinets or casework. The KV Model #8850 configuration is recommended for drawers up to 42 inches wide, which supports use on wider pull-outs where stability and load control matter. This 200 lb class drawer slide is designed to carry heavy loads, helping drawers handle dense tools, hardware, or supplies without overstressing the slide. The soft-close module uses patented Force Management Technology, which delivers low opening pull force while still pulling the drawer closed with dampening to eliminate slamming in everyday use. A non-handed design supports installation on either side without matched left and right parts. The unhanded side mount zinc slide finish supports typical shop and cabinet environments where metal slides are standard.
The recommended side clearance of 0.765 inches plus 0.03 minus 0 inches defines the space between drawer side and cabinet, which guides drawer box sizing for proper slide engagement. A slide width of 0.76 inches indicates the profile thickness at the side, which influences how the slide nests in standard cabinet constructions. The 2.09 inch height figure shows the vertical dimension of the slide, which affects layout when stacking drawers or working near fixed shelves. The lever release design supports separating the drawer member from the cabinet member, which can simplify fitting and adjustments when aligning multiple drawers in a run. Recommended fasteners are #8 x 5/8 inch flathead screw, which provides a direct reference when matching screws to the mounting holes on the slide members.
The 8850FMB 26 designation identifies a 26 inch length slide in the KV Model #8850 line, which positions this slide for standard-depth drawers in many cabinet, shop, and storage layouts. Being recommended for drawers up to 42 inches wide means the slide geometry and 200 lb class support wider, heavier drawers, such as tool chests or deep storage pull-outs. The side mount, ball bearing construction places the slide along the exterior of the drawer box, which matches common cabinet side constructions and supports straightforward mounting on flat cabinet sides. The 200 lb class rating ties directly to heavy contents, so drawers carrying hardware bins, tooling, or dense supplies can be built with confidence in the slide capacity. Full extension travel lets these heavy drawers clear the cabinet face, which is important when loading or unloading bulky items that would be hard to reach in a partial-extension configuration.
The soft-close module with patented Force Management Technology is designed to deliver the lowest opening pull force while still controlling closure, which matters when multiple drawers are used all day and operators want both easy opening and consistent, damped closing. By eliminating drawer slamming, this soft-close behavior supports reduced impact at the cabinet fronts, which is relevant for maintaining alignment and surface condition over repeated use. The non-handed design means each slide in the 8850FMB 26 set is not side-specific, which simplifies installation steps and reduces orientation errors when mounting left and right sides. Lever release on the slide provides a clear method to separate drawer and cabinet members, which is valuable when setting reveals, adjusting drawer faces, or finishing interior work after the drawer boxes are built. The specified side clearance of 0.765 inches plus 0.03 minus 0 inches defines a predictable fit envelope, which supports repeatable drawer sizing workflows and reduces trial-and-error fitting across multiple cabinet sections.
The Knape and Vogt 8850FMB 26 slide is recommended for drawers up to 42 inches wide, which supports use on wider drawers that carry heavier contents.
The 8850FMB 26 slides are a 200 lb class drawer slide, which supports applications where drawers hold dense tools, hardware, or other heavy materials.
The slides use a recommended side clearance of 0.765 inches plus 0.03 minus 0 inches, which guides drawer box width for proper slide engagement and travel.
The 8850FMB 26 slides have a non-handed design, so the same slide style works on either side of the drawer for simpler installation.
The slides specify recommended fasteners of #8 x 5/8 inch flathead screw, which match the mounting holes on the slide members.
The 8850FMB 26 uses a soft-close module with patented Force Management Technology to lower opening pull force and dampen closing, which prevents drawer slamming.
The Knape and Vogt 26 inch soft close drawer slides in the 8850FMB 26 model give full extension travel, 200 lb class capacity, and a soft-close module that manages pull force and closing speed. The side mount, non-handed configuration fits standard cabinet construction while supporting drawers up to 42 inches wide. With defined side clearance, slide width, and height dimensions, these slides align with repeatable drawer box sizing and layout. For heavy, wide drawers that benefit from smooth, damped closing, this 26 inch KV 8850 slide configuration offers a practical, specification-driven option.
Sold In: 1 Set