Hettich Quadro V6 15" Soft-Close Full Extension Undermount Drawer Slides, Ball Bearing Left hand Zinc - 9262846

Hettich Quadro V6 Undermount Slide For 15 Inch Drawers

Hettich Quadro V6 undermount drawer slide gives a 15 inch drawer full extension and soft-close action, so the drawer travels its full length while closing smoothly for controlled access to stored items. This left hand, ball bearing slide mounts under the drawer, which keeps hardware hidden and supports clean cabinet interiors on professional jobs. The integrated damping system Silent System slows the closing motion, which reduces slamming forces on the drawer box and cabinet.

The slide on installation design uses 4D front fixing clips with tilt adjustment, so the drawer front can be connected and fine-tuned without complex tools. Galvanized steel construction provides a rigid running track, which supports consistent slide movement under load in everyday residential or commercial use. This undermount drawer slide is part of the Hettich America Corporation Quadro family, aligning with established shop standards for concealed slides.

Key Functional Details For Cabinet Builders

• Full extension travel lets the 15 inch drawer open to its rated length, giving access to the rear of the box so stored items can be reached without shifting the drawer.
• Integrated damping system Silent System manages closing speed, so drawers decelerate near the cabinet front, which limits impact on joinery and reduces noise in finished spaces.
• Slide on installation with 4D front fixing clips lets the drawer engage the slide quickly, which supports efficient assembly when repeating the same setup across multiple cabinets.
• Tool-less, intuitive height, side, depth, and tilt adjustment is built into the system, so fit can be dialed in at the front without removing the drawer during alignment work.
• Load capacity up to 90 lbs dynamic, 100 lbs static on a 21 inch slide, as per ANSI/BHMA 156.9 grade 1, indicates the slide family is engineered for demanding drawer loads in typical cabinet applications.
• Galvanized steel components resist corrosion under normal interior conditions, which helps the running geometry remain stable over time in kitchen, bath, or shop installations.

Undermount Slide Fit And Adjustment Details

This undermount drawer slide is designed for drawers with side thickness up to 5/8 inch (16 mm), so a standard thin drawer side can sit over the slide while maintaining clearance inside the cabinet. The slide supports both face frame and frameless applications, which lets the same slide family be used across different cabinet construction methods in one shop. Tool-less height adjustment up to plus 2 mm at the front helps align drawer reveals vertically within a bank, while side adjustment up to plus or minus 1.5 mm shifts the front laterally to even gaps.

Depth adjustment up to plus or minus 2 mm allows the drawer front to be moved in or out relative to the cabinet face, which helps align fronts flush across adjacent units. Tilt adjustment at the 4D front fixing clips lets the top and bottom of the drawer front be rotated slightly, which is useful for correcting minor out-of-square conditions in drawer boxes or cabinet openings without rebuilding parts.

Using This Quadro V6 Slide In Real Projects

Drawer Slide For Face Frame And Frameless Cabinets

This undermount drawer slide works in both face frame and frameless applications, so one slide family can support kitchens, baths, and commercial casework built with different cabinet styles. The 15 inch length suits drawer boxes sized for that travel, which is typical for many base and vanity cabinet layouts. Because the slide mounts underneath, the drawer sides remain visually clean, which supports higher-end installations where exposed hardware is avoided.

The slide is engineered for drawers with side thickness up to 5/8 inch (16 mm), so common plywood or solid wood sides in that range can be used without rethinking standard drawer construction details. Full extension movement means the back of the drawer clears the face of the cabinet when open, which improves access for deeper storage, particularly in base cabinets and utility pieces. The left hand orientation of this slide is defined by part number 9262846, which matters when matching it with its corresponding right hand slide in a set on the bench.

4D Adjustment And Load Performance For Repeatable Results

The system provides tool-less, intuitive height, side, depth, and tilt adjustment through the 4D front fixing clips and integrated mechanisms, so installers can fine-tune reveals and alignment on site without disassembling the drawer. Height adjustment up to plus 2 mm at the front lets stacked drawers share consistent top and bottom gaps, which presents a uniform run across a bank of cabinets. Side adjustment up to plus or minus 1.5 mm allows the front to shift left or right, which is useful when cabinetry or flooring tolerances introduce small offsets.

Depth adjustment up to plus or minus 2 mm sets how far the drawer front sits relative to the frame or cabinet edge, which supports flush or slightly proud arrangements according to the overall design. Tilt adjustment corrects top-to-bottom skew at the drawer front, which helps align joints and edge profiles even when the opening or box is slightly out of square. The slide meets or exceeds ANSI/BHMA 156.9 grade 1 requirements with load capacity up to 90 lbs dynamic and 100 lbs static on a 21 inch length, so the Quadro V6 family is suited for drawers carrying substantial contents where stable motion under load is important.

Common Questions About This Hettich Drawer Slide

Select This Quadro V6 Slide For Precise Drawer Fit

The Hettich Quadro V6 15 inch soft-close, full extension undermount drawer slide in galvanized steel offers integrated Silent System damping, 4D front fixing clip adjustments, and ANSI/BHMA 156.9 grade 1 load performance, aligning well with professional cabinet and drawer projects.