Quadro 4D V6 24" Soft-Close Full Extension Undermount LH Drawer Slide 10/Box Hettich 9 262 852

Left-Hand Cabinet Member for the Hettich Quadro V6 24" Undermount System

This is the left-hand cabinet member of the Hettich Quadro V6 soft-close, full-extension undermount drawer slide system in a 24 inch nominal length. It mounts to the left side of the cabinet interior and carries the drawer box on a ball-bearing undermount runner with integrated soft-close damping. Pair it with the matching right-hand member to complete one drawer installation.

Key Features

• Left-hand orientation — mounts to the cabinet's left side; one left-hand and one right-hand member make a working drawer pair.
• Soft-close motion — integrated damper catches the drawer near closed and settles it silently, no snap or slam.
• Full extension — the drawer travels out to the cabinet face, putting the entire box interior within reach.
• 90 lb weight capacity — rated per pair, suited to kitchen, bath, and storage drawers with real loads.
• Fits face-frame and frameless cabinets — compatible with both construction styles; face-frame installs require the appropriate rear mounting hardware.
• Ball-bearing steel construction, Zinc finish — precision ball bearings run in steel raceways for smooth, long-cycle performance.

Where This Slide Fits

The Quadro V6 is an undermount system, so it mounts beneath the drawer box and stays hidden when the drawer is open. The 24 inch nominal length suits standard kitchen base drawers and pantry pull-outs built to that depth. Full extension means the back of the drawer clears the cabinet face completely, which matters in pots-and-pans drawers and deep storage where reaching the rear of the box is part of every use. The soft-close damper makes this a practical choice for any kitchen or bath application where a silent, controlled close is expected. In face-frame cabinets, rear mounting brackets are required to support the back end of the slide; those brackets are series-specific to the Quadro V6 and must be ordered separately.

Construction and Drawer Box Requirements

The Quadro V6 is a ball-bearing undermount system with a Zinc finish on steel members, built for the repeated cycles of a working kitchen. Because it is an undermount design, the drawer box must be built to Hettich's published specification for the Quadro V6: drawer side thickness between 1/2 inch and 5/8 inch, the correct box width for 4mm side clearance per side, and the rear notch and locking-device drilling that the system requires. The front locking devices that fasten the drawer box to the slide are Quadro V6-specific; locking devices from other Hettich series or other brands will not seat correctly on this runner.

Who Orders This Member and Why

Cabinet shops running Hettich Quadro V6 on CNC-bored boxes are the natural buyers here — the system's 4D adjustment capability lets installers true the drawer front in multiple directions after hanging, which speeds finishing work on a production run. Designers specifying undermount hardware for face-frame kitchens also reach for this series because it handles both construction styles without a separate product line. The left-hand member is also the one to order when a single member in an installed pair needs replacement without pulling the whole installation. If you are outfitting a new drawer from scratch, order one left-hand and one right-hand member together.

The Right Member for a High-Performance Undermount Install

When the Quadro V6 is specified, getting the handedness right from the first order keeps the job moving. This left-hand member pairs with its right-hand counterpart and delivers full extension, soft-close performance, and the multi-direction adjustment that makes drawer-front alignment fast on a busy production schedule.