Flange w/Screws Oval 44mm Matte Black describes an EPCO oval flange designed for closet rods and flanges work, so it serves as a mounting point where an oval closet tube meets the side support. The 44mm length gives a defined contact area, which helps stabilize the rod end in typical closet layouts. The matte black finish provides a dark, low-sheen look that blends with many modern closet designs. This flange is classified under Closet Rods & Flanges, so it is aimed at supporting closet tubing in shelf, closet, and garage organization projects. The EPCO brand and 840-BL part number identify the exact component, which matters when matching existing hardware or repeating a proven closet layout across multiple openings.
This EPCO oval flange is described specifically as having no mounting pins, so it sits flat against the mounting surface and relies on screws through the body to hold it in place. That pinless design lets the installer position the flange exactly where the closet rod layout requires, rather than locking into pre-drilled pin holes. The presence of screws in the product description means the flange is intended for screw-fastened mounting, giving a direct mechanical tie between the zinc body and the supporting panel or stud. Combined with the 44mm length, this layout creates a defined footprint that helps transmit the load from the closet rod back into the structure.
This EPCO flange sits in the Shelf, Closet & Garage Organization category, so its role is to support closet tubing in storage and hanging areas. Being part of the Closet Rods & Flanges product class, it is aimed specifically at closet rod terminations and supports rather than general brackets. The oval profile works with oval closet tubing, so it aligns with rod systems that use an oval cross-section for hang strength and visual style. The 44mm length provides a compact footprint at the cabinet or wall side, which helps when fitting rods between vertical panels or into tight alcoves. Because the flange is matte black, it visually coordinates with other dark hardware in closets, garages, or similar organized storage spaces.
The zinc construction on this EPCO 840-BL flange provides a rigid metal base for the closet rod interface, which supports repeatable mounting when multiple openings share the same layout. The 44mm dimension gives a predictable size at each rod end, so shop drawings and field measurements can reference a consistent flange length during fabrication. The matte black finish delivers a steady appearance from part to part, which matters when repeating the same design through several closets or bays. Having no mounting pins means the installer can place screw holes according to the panel design, so the flange position can match other hardware lines or clearance requirements. Tying all of these details to the 840-BL part number allows future orders to pull the same zinc, matte black, 44mm oval flange for later phases or repairs.
The EPCO 840-BL flange is listed under Closet Rods & Flanges with an oval form, so it is intended to support oval closet tubing in closet or storage installations.
The 44mm length defines the flange footprint at the mounting surface, giving a known space the installer can allow for when setting rod spans between panels or walls.
The matte black finish provides a dark, low-sheen look that coordinates with black closet rods or other black hardware, helping achieve a consistent visual style.
The zinc construction gives the flange a metal body, which provides a solid base to carry the closet rod load into the supporting structure in typical closet setups.
The EPCO flange is described as having no mounting pins, so it is mounted by driving screws through the flange body into the supporting panel or framing.
The EPCO 840-BL part number uniquely identifies this oval, zinc, 44mm matte black flange, which helps designers and installers repeat or expand matching layouts.
The EPCO Flange w/Screws, Oval 44mm L, Matte Black - 840-BL combines an oval profile, zinc body, 44mm length, and matte black finish for closet tubing work. Those defined characteristics let you specify and order the same flange wherever an oval closet rod needs a consistent, metal-mounted support point.
Sold In: 1 Each