Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Flange w/Screws, Oval 44mm L, Oil Rubbed Bronze defines this EPCO oval open flange as a dedicated support point for oval closet tubing, giving a clear match between 44mm length rod stock and the flange footprint. The oil rubbed bronze finish identifies the visual look the flange provides around the closet rod end, which matters when trim hardware must align with other bronze components in the space. The zinc construction defines the underlying base metal, which supports routine closet use in typical residential or light commercial conditions. The oval open flange design establishes that the rod drops in from the open side instead of feeding through a closed ring, which simplifies rod placement where one end is fixed by walls or cabinets. The EPCO brand and 840-ORB part number tie this flange back to a repeatable catalog item for consistent reorders on future closet runs.
The web description note of no mounting pins confirms this EPCO 840-ORB flange uses a flat-back mounting face without indexing posts, so the flange sits flush against wood or panel substrates. The zinc body behind the oil rubbed bronze finish provides a solid base when the installer secures the flange to vertical closet walls or cabinet gables. The oval open design identified in the SAP description allows the rod to drop into the opening from above, which matters when walls or adjacent cabinets prevent feeding a long rod through a closed ring. The 44mm length from the product name sets the footprint scale on the mounting surface, helping plan spacing when laying out multiple flanges along a run of closet tubing or separating sections.
The Category line of Shelf, Closet & Garage Organization and Closet Tubing & Flanges places this EPCO 840-ORB flange directly in typical closet or storage rod layouts. The Product Class of Closet Rods & Flanges defines its role as a termination or support point for oval tubing rather than a decorative bracket. The 44mm length specification positions the flange to pair with oval closet rods sized for that footprint, guiding use in hanging sections where an oval profile is already planned. The oil rubbed bronze reference in the product name and part number frames this flange for projects where other hardware follows the same bronze tone, keeping rods, flanges, and visible trim in a common finish family. The oval open configuration described in the SAP text supports end-of-run or mid-panel mounting wherever side-loading a rod into the opening is the preferred workflow.
The SAP description that spells out OVAL OPEN FLANGE W/SCREWS,44MM,ORB ties several alignment factors together in one defined part. The oval open geometry sets a clear seating pocket for oval tubing, which helps keep rod rotation and sag in check once fastened. The 44mm length gives installers a consistent reference point for laying out matching flanges on opposite walls so rod ends align cleanly. The zinc material called out in the web description defines the rigidity of the flange body, which matters when rods carry typical closet loads across spans. The oil rubbed bronze finish from the product name and manufacturer part number 840-ORB sets a consistent color target, keeping each flange visually identical along a multi-section installation. The EPCO branding and specific part number support repeatable ordering, so additional closets or later expansions can use the same flange geometry and finish for uniform results.
The flange is described as an oval open flange and is categorized under Closet Tubing & Flanges, so it is configured to support oval closet tubing in hanging storage sections.
The 44mm length in the name and SAP description defines the flange footprint, helping align matching flanges on opposing panels so oval rods seat evenly at each end.
Oil rubbed bronze in the name and part number 840-ORB identifies a dark bronze finish, allowing the flange color to coordinate with other oil rubbed bronze closet components.
The web description notes zinc, so the flange body uses zinc as the base metal, providing a solid mounting surface for closet rod support.
The SAP description calls it an oval open flange, which lets the installer drop the oval rod into the opening from above instead of threading through a closed ring.
The web description states no mounting pins, indicating a flat-back flange face so it sits flush on closet walls or panels without pin recess drilling.
This EPCO Flange w/Screws, Oval 44mm L, Oil Rubbed Bronze uses its oval open form, zinc base, and oil rubbed bronze finish to anchor oval closet tubing where both support and appearance matter. The 44mm length and closet-specific category place it in standard hanging storage layouts using oval rods. The defined 840-ORB part number and zinc construction give a consistent reference for repeated jobs or phased projects needing the same flange geometry and finish. For closet tubing runs built around oval rod profiles, this oval open flange provides a clearly identified mounting point that aligns flange dimensions, finish, and material with the overall design.
Sold In: 1 Each