Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Flange w/Screws Oval 44mm Satin Brass is an EPCO oval flange designed for closet rods in shelf, closet, and garage organization projects, so it gives closet tubing a defined mounting point within the hardware layout. The 44mm length establishes a compact footprint on the mounting surface, which helps when space around the closet rod endpoint is tight. The satin brass finish provides a specific brass tone that can match or coordinate with other satin brass closet hardware, supporting a consistent visual line across multiple openings. The zinc construction underneath the finish creates a solid base material for the flange body, giving the rod support piece a stable structure in normal closet hardware applications. The EPCO 840-SB part number clearly identifies this exact satin brass, 44mm oval flange in the EPCO line, so it is straightforward to specify or reorder the same component for repeat jobs or extensions.
This oval flange has no mounting pins, which means the flange relies on screw fasteners for attachment to the substrate and does not depend on pin holes in the panel or wall. That design suits situations where the mounting surface is solid and installers want to position the flange freely without aligning to factory pin locations. Screws supplied with the product match the flange layout, so the installer can drive fasteners through the intended points on the flange body, helping the rod support sit flat and secure. The 44mm length of the flange concentrates this screw pattern into a relatively short mounting zone, which fits well on closet side panels or narrow framing members at the end of a rod run.
The EPCO 840-SB oval flange is classified under closet rods and flanges, positioning it as a standard endpoint for closet tubing in organization systems. Its role within shelf, closet, and garage organization means it works in layouts where a closet rod needs a defined bearing point at each end, such as reach-in closets, wardrobe sections, or garage hanging zones using closet tubing. The oval profile is specifically suited to oval closet rods, so it aligns the rod shape with a matching contact area at the support, which can reduce point loading compared to placing an oval rod on a round seat. Because the flange is part of a closet tubing and flanges category, it functions as one of the primary structural interfaces between the rod and the mounting surface, taking the vertical hanger load and transferring it into the side panel or wall.
The satin brass finish on this oval flange creates a defined appearance standard, allowing installers to repeat the same look across multiple closets within a project by specifying EPCO 840-SB each time. The zinc construction gives the flange a uniform metal base, so when installed in similar substrates and span conditions, the support behavior from one opening to the next remains consistent. The 44mm length sets a repeatable mounting footprint, which helps layout teams center rod positions at a known distance from the panel front or back edge when they build jigs or templates. The absence of mounting pins removes dependency on pre-drilled pin systems, which lets fabricators drill their own pilot locations based on this flange shape and replicate that pattern across cabinets or partitions. Screws delivered with the flange create a matched fastener and flange combination, so the same screw style and length are used wherever this part number appears, supporting uniform installation habits and reducing variation from closet to closet.
The EPCO 840-SB part is an oval flange in the closet rods and flanges class, so it works with oval closet tubing in shelf, closet, and garage organization layouts.
The 44mm length defines a compact mounting footprint, so the flange occupies a short section of panel or wall, helping fit closet rods near returns or side panels.
No mounting pins means the oval flange attaches using screw fasteners only, allowing flexible placement on the mounting surface without aligning to pre-drilled pin holes.
This oval flange is made from zinc, giving the satin brass finished part a solid metal base so it can act as a structural support for closet rods.
The satin brass finish sets the visible color of the flange, letting installers coordinate it with satin brass closet rods and other satin brass hardware on the project.
The EPCO 840-SB part number uniquely identifies this 44mm satin brass oval flange, so specifiers can call out the same component across drawings and reorders.
The EPCO Flange w/Screws, Oval 44mm L, Satin Brass - Epco 840-SB provides an oval zinc flange with satin brass finish and screw fastening, so it creates a defined endpoint for oval closet tubing in shelf, closet, and garage organization work. Its 44mm length, lack of mounting pins, and closet rods and flanges classification all support predictable use as a closet rod support in panels or on walls. Ordering this specific EPCO 840-SB satin brass oval flange lets shop teams and installers apply a consistent rod support component across projects that call for oval closet tubing in a satin brass look.
Sold In: 1 Each