Epco 840-DC oval flange defines the mounting point for an oval closet rod, so the tube lands in a fixed location that supports straight, consistent hanging space. The 44mm length creates a compact bearing surface that fits typical closet layouts without taking up extra room at the end of the rod. The dull chrome finish presents a low-glare metallic look that blends into most closet interiors while matching other muted hardware. As a shelf, closet, and garage organization component in the closet tubing and flanges family, this part serves as the rod interface to your vertical panels or walls. The flange is built from zinc, giving a solid metal body that resists everyday contact in normal closet use. A no mounting pins design means the flange seats flat against the mounting surface, simplifying layout when you are setting out hole positions.
This oval flange works as part of a closet rods and flanges setup, so it acts as the fixed point that receives the closet tubing and defines rod height. The no mounting pins description indicates the back face stays smooth against the mounting surface, making alignment reliant on your hole pattern rather than factory pins. At 44mm length, the flange occupies a small area, giving space around it for other layout features such as adjacent panels or returns. The dull chrome finish on zinc means the visible portion coordinates with similar toned hardware, while the metal body handles the contact where the tube enters the flange. As an EPCO component, the part number 840-DC identifies this specific dull chrome, zinc, 44mm oval style when matching existing hardware.
This flange sits in the closet tubing and flanges category, so it is meant to mount at the termination points of a closet rod on side panels or walls. When set as part of a closet rods and flanges arrangement, one or more flanges form the receiver points for the oval tube, turning a bare panel into a hanging zone. The 44mm length controls how much panel face the hardware occupies at the rod end, which can help maintain uniform spacing in multi-section closet systems. The dull chrome finish lets the flange sit visually in the background, which is useful in open or walk-in closets where hardware remains visible at eye level. Because the flange is zinc, the material provides a firm interface where the oval tubing bears as garments add load to the run.
The Epco 840-DC oval flange description notes no mounting pins, so all fixation relies on your chosen fastening pattern through the flange body into the substrate, giving flexibility in layout while keeping the flange flush. The oval geometry is intended for oval closet tubing, which keeps rotation controlled at the rod and helps the tube present a stable top surface for hangers. The 44mm dimension makes it easier to position opposing flanges at matching heights, because the small footprint is simple to reference off panel edges. With its dull chrome finish over zinc, the flange surface at the opening remains metal-to-metal with the rod, supporting repeatable alignment when rods are cut and set to length in a run. As an EPCO closet rods and flanges part, the 840-DC designation assists in reordering matching flanges for additional sections or replacements in existing systems.
The Epco 840-DC oval flange provides the fixed mounting point for an oval closet rod, establishing rod position so hanging space stays aligned with the closet layout.
The 44mm length defines a compact footprint at the rod end, helping installers place opposing flanges consistently while leaving panel space for adjacent components.
The zinc construction provides a solid metal body around the rod opening, while the dull chrome finish offers a subdued metallic look that coordinates with similar hardware.
The oval shape matches oval closet tubing, allowing the rod to nest into the opening so the tube stays oriented correctly and supports hangers along a stable top edge.
The no mounting pins design means the flange sits flush against the surface and relies on your screw pattern, offering flexibility in positioning during layout.
The EPCO 840-DC part number identifies this specific zinc, dull chrome, 44mm oval flange, helping match or extend existing closet rods and flanges installations.
The Epco 840-DC oval flange combines a zinc body, 44mm length, and dull chrome finish to anchor an oval closet rod at its mounting point. As a closet tubing and flanges component in the closet rods and flanges class, it defines how the rod meets your panel or wall. The no mounting pins configuration keeps the back face smooth, letting the flange sit flat while you position it to suit your layout. For projects built around EPCO closet hardware, the 840-DC designation ties this exact oval flange into new runs or extensions of existing systems.
Sold In: 1 Each