Flange w/Screws Oval 44mm L Satin Nickel - Epco 840-SN is a zinc oval flange that supports closet rods or tubing in shelf, closet, and garage organization layouts. The oval 44mm length gives an elongated bearing surface, helping distribute rod load along the flange instead of at a single point. This matters on closet installations where hanging weight and repeated movement can stress the mounting area. The satin nickel finish on the flange presents a clean, neutral look that works with common closet hardware colors and helps maintain a consistent appearance in visible storage spaces. Because the part is in the Closet Rods & Flanges product class, it is suited to projects that rely on rod support points along shelving runs and wardrobe sections. The EPCO brand identification and 840-SN part number give a clear reference for reorders and matching flanges during future layout changes.
The OVAL FLANGE W/SCREWS,44MM,SATIN NICKEL description confirms the flange is configured for screw mounting, giving a direct mechanical connection between closet tubing supports and the substrate. Using screws to secure the 44mm long oval flange helps hold rod ends in fixed alignment along a closet wall or panel. The absence of mounting pins means the flange relies solely on screw fastening, which simplifies the contact pattern at the wall surface. In closet tubing layouts, this approach lets the zinc flange act as a stable bearing point so rods track straight from flange to flange. The satin nickel finish extends over the visible flange edges, supporting a finished appearance at each rod termination in open or walk-in closet runs.
The Flange w/Screws, Oval 44mm L, Satin Nickel - Epco 840-SN sits in the Closet Rods & Flanges class, so it is oriented toward supporting closet tubing in storage systems. Its placement under Shelf, Closet & Garage Organization ties it directly to organizing runs where rods interface with shelving or side panels. The oval shape of the zinc flange is suited to oval closet tubing profiles, giving the rod a mating surface that follows the same geometry along its contact edge. At 44mm length, each flange provides extended support where rods transition to side walls or end panels, which is important at hang points that see concentrated loads at the ends of a closet span. The satin nickel finish lets this flange work in visible reach-in or walk-in closet applications where rod terminations are at eye level.
The 44mm length of the OVAL FLANGE W/SCREWS,44MM,SATIN NICKEL helps installers create repeatable rod positions because the flange defines a clear front-to-back seating depth for the closet tubing. With screw-based attachment described in the Web Description, each flange can be positioned to match layout marks and then locked in place, helping keep rods parallel to adjacent shelving. The zinc material forms a solid interface for closet rods entering the flange, which helps reduce flex at the point where hanging loads concentrate near walls or panels. The satin nickel surface treatment gives each Epco 840-SN oval flange a consistent look, making it easier to align multiple flanges visually across a long closet run. Because the part is identified as Epco 840-SN, installers can return to the same flange model when extending an existing closet or duplicating a layout in additional rooms.
The Epco 840-SN oval flange is listed under Shelf, Closet & Garage Organization and Closet Rods & Flanges, so it is intended for supporting closet tubing in storage and organization projects.
The 44mm length gives the oval flange a longer bearing surface along the wall or panel, helping distribute closet rod loads over a wider area at each mounting point.
The satin nickel finish on the Epco 840-SN flange provides a neutral, finished appearance that aligns with many closet hardware finishes, supporting a consistent look at rod terminations.
The OVAL FLANGE W/SCREWS,44MM,SATIN NICKEL description notes screw use, so the flange attaches by screw fastening, creating a direct mechanical hold between the flange and substrate.
The Web Description states no mounting pins, so the flange relies on screws for retention, creating a simple wall contact pattern focused on the screw locations.
The zinc construction gives the Epco 840-SN flange a rigid base at the closet rod interface, supporting hanging loads where rods meet walls or side panels.
The Flange w/Screws, Oval 44mm L, Satin Nickel - Epco 840-SN combines a zinc oval body, 44mm length, and satin nickel finish for closet rod support within Shelf, Closet & Garage Organization layouts. Its classification in Closet Rods & Flanges and its screw-based OVAL FLANGE W/SCREWS,44MM,SATIN NICKEL description position it as a practical option when defining rod endpoints against walls or panels. For projects that need repeatable closet tubing terminations with identifiable hardware, the EPCO 840-SN part number gives a clear reference for specifying this satin nickel flange across current and future storage runs.
Sold In: 1 Each