Hettich Actro 5D 450mm Soft-Close Full Extension Undermount Drawer Slides, Ball Bearing Left hand Zinc - 9257100

Hettich Actro 5D 450mm Drawer Slide For Wooden Drawers

Hettich Actro 5D 450mm drawer slide is a full extension undermount runner designed for use with wooden drawers, so the moving hardware sits under the box and allows clear access to the full drawer length during everyday use. The runner is part of the Actro 5D system from Hettich America Corporation, giving installers a defined product family and part number to match across projects. A soft-close function is built into this runner, so drawers are pulled closed in a controlled motion, which helps reduce slamming in high-use kitchen, bath, and storage applications. The runner is specified for a 154 lb load class in the SAP description, aligning with the EN 15338 Level 3 load capacity reference for demanding drawer applications where higher static and dynamic loads are expected. Construction in galvanized steel provides a rigid running element and a zinc-coated surface that suits typical cabinet-shop and jobsite environments.

Key Actro 5D Runner Details That Support Workflow

• The full extension runner layout lets the drawer travel completely out of the cabinet, so contents are accessible across the full depth and installers can size drawer boxes to use the 450mm nominal length effectively.
• The soft-close function is part of the runner design, so once the drawer is pushed toward the cabinet, the mechanism slows and seats the drawer, which helps reduce rebound and noise in daily operation.
• The undermount configuration works with wooden drawers, so the hardware remains concealed under the box, which is useful when builders need clean side profiles or are working with inset or overlay fronts that rely on precise clearances.
• The runner is described for load classes XS (10 kg), L (40 kg), and XL (70 kg) to EN 15338 Level 3, so planners can match drawer size and expected weight to the appropriate class while keeping to a standardized performance level.
• Galvanized steel construction provides a stable track for the ball bearing runner, so loads in the specified range are supported by a rigid, corrosion-resistant metal that stands up to typical indoor cabinet environments.

5D Adjustment And Mounting Benefits For Installers

The Actro 5D runner provides tool-less height adjustment up to plus 3 mm, so installers can shift the drawer front vertically on site to correct reveals without changing the cabinet or drawer box. Side adjustment of plus or minus 1.5 mm lets the drawer front be moved horizontally, which supports fine-tuning gaps between adjacent fronts or panels. Tilt adjustment up to plus 4 mm allows the angle of the drawer front to be altered, which is useful for aligning top and bottom reveals on taller fronts. Radial adjustment of plus or minus 1.5 mm lets the drawer be set in or out relative to the cabinet, which helps achieve a consistent plane across a run of fronts when face frames or carcasses vary slightly. These combined adjustments are designed into the system, so fine-tuning can be handled at installation rather than at the bench.

Using The Actro 5D 450mm Runner In Cabinet Projects

Where This 450mm Undermount Slide Fits Best

This 450mm full extension runner is specified for combining with wooden drawers, so it fits projects where boxes are built from wood-based materials rather than metal systems. The undermount design places the galvanized steel runner beneath the drawer, which suits residential and commercial cabinetry where a concealed slide is preferred, such as kitchens, bathrooms, and office storage. The Actro 5D system defines load classes XS at 10 kg, L at 40 kg, and XL at 70 kg under EN 15338 Level 3, so designers can select this runner for drawers expected to carry up to the referenced capacity range while still operating through full extension. The 450mm length matches cabinet depths designed around that nominal dimension, which is common in many carcass layouts and allows consistent planning of drawer box depths across a run.

Why 5D Adjustment And Load Class Help Results

The Actro 5D designation identifies tool-less adjustment in five directions, so height, side, tilt, and radial settings can be tuned directly on the mounted runner to align fronts and compensate for minor cabinet or drawer variations. Height adjustment up to plus 3 mm helps correct situations where a front sits slightly low, bringing reveals back into line along the top edge. Side adjustment of plus or minus 1.5 mm lets an installer nudge the front left or right, which is especially helpful in banks of drawers where even a small misalignment is noticeable. Tilt adjustment up to plus 4 mm lets the front be rotated to match nearby doors or adjacent fronts, helping maintain straight sightlines in tall drawer applications. Radial adjustment of plus or minus 1.5 mm supports setting the front flush with surrounding surfaces, which is important in inset or tight overlay installations. The defined load classes XS, L, and XL under EN 15338 Level 3 mean this runner is engineered around known weight ranges, so drawers built within those classes can be planned with predictable running behavior under typical use.

Common Questions About Hettich Actro 5D 450mm Slides

Selecting This Actro 5D Runner For Your Project

The Hettich Actro 5D 450mm drawer slide pairs a full extension undermount design with soft-close action, so it supports accessible, controlled drawer movement in wooden drawer applications. Load handling defined by EN 15338 Level 3 and the XS, L, and XL load classes gives planners clear ranges for expected drawer weights. The combination of height, side, tilt, and radial adjustments allows alignment work to be handled on site using the runner features. For projects needing a galvanized steel, 450mm, soft-close undermount solution for wooden drawers, this Actro 5D runner is a focused option for integrating into cabinet designs.