Hettich Actro 5D 750mm Soft-Close Full Extension Undermount Drawer Slides, Ball Bearing Right hand Zinc - 9257119

Hettich Actro 5D 750mm Drawer Slides For Wooden Drawers

Hettich Actro 5D 750mm drawer slides are full extension undermount runners designed for use with wooden drawers, so the runner supports the drawer from below while the drawer front stays clean. The soft-close function slows the drawer at the end of travel, which protects fronts and keeps drawers from slamming in daily use. The system provides a load capacity classified as 154 lb to EN 15338, Level 3, giving support for heavier residential or commercial storage where higher loads are expected. This right hand runner uses ball bearing technology, which supports smooth motion along the full 750mm travel length. The galvanized steel construction provides a zinc surface, which helps resist corrosion in typical cabinet environments and keeps the slide structure stable over time.

Key Actro 5D Runner Details For Daily Work

• The full extension design lets the 750mm wooden drawer travel completely out of the cabinet, giving clear access to the back of the drawer and simplifying loading or measuring internal space.
• The soft-close feature on this undermount runner slows and pulls the drawer closed, reducing impact on drawer fronts and helping maintain front alignment over repeated open-and-close cycles.
• The runner is specified with a load capacity of 154 lb to EN 15338, Level 3, so it supports higher stored weights while staying within a recognized performance classification for drawer runners.
• The ball bearing mechanism controls movement of the right hand runner, supporting smooth travel under load and helping drawers feel consistent from fully closed to fully extended positions.
• The galvanized steel construction with a zinc surface protects the runner body from typical moisture and handling in cabinet interiors, which supports long-term function and stable slide geometry.

Actro 5D Undermount Runner Adjustment Functions

The Actro 5D runner provides tool-less height adjustment up to plus 3 mm, so the installer can raise the drawer front relative to the cabinet opening without using separate tools during fine-tuning. Side adjustment up to plus or minus 1.5 mm shifts the drawer laterally, which helps align gaps between fronts across a bank of drawers. Tilt adjustment up to plus 4 mm allows the front to be angled, giving a way to correct visible racking or out-of-square conditions within the opening. Radial adjustment up to plus or minus 1.5 mm changes the depth-related position of the drawer front, which supports flush fronts or reveals in face-frame or frameless applications where precise front positioning is important.

Using The 154 lb Actro 5D Runner In Projects

Where This Hettich 9257119 Runner Is Applied

This Hettich America Corporation Actro 5D runner, part number 9257119, is specified for combining with a wooden drawer, so the drawer box is built from wood while the runner mounts underneath. The 750mm length suits deeper cabinet applications where full extension access is a priority, such as long kitchen drawers or storage pullouts requiring full-depth reach. The right hand configuration identifies this piece as the runner for the right side of the undermount system, which matters when matching left and right components in a set. The Actro 5D system carries a load class designation of XS 10 kg, L 40 kg, and XL 70 kg, so it is structured to handle several load classes within the same runner family. The soft-close full extension design supports use in living spaces where controlled movement and quiet closing are part of the project brief.

Why Actro 5D Adjustments Support Precise Results

The tool-less 5-way adjustment built into this runner - height, side, tilt, and radial ranges - allows installers to correct minor variances in cabinet or drawer construction without disassembling hardware, which reduces rework time during install. Height adjustment up to plus 3 mm lets the front be lifted into a consistent reveal line, valuable when working under countertops or aligning with adjacent fronts. Side adjustment up to plus or minus 1.5 mm shifts the drawer box relative to the runner, helping create even gaps between neighboring drawers or doors. Tilt adjustment up to plus 4 mm helps correct a front that appears higher on one side, supporting clean horizontal lines across wide drawer banks. Radial adjustment up to plus or minus 1.5 mm moves the front in or out, which is important when building frameless installations that rely on tight, controlled reveals around the cabinet face.

Common Questions About This Actro 5D Drawer Runner

Selecting This 750mm Actro 5D Runner For Your Build

This Hettich Actro 5D 750mm drawer runner from Wurth Baer Supply combines full extension, soft-close action, and a 154 lb EN 15338 Level 3 load capacity for demanding drawer applications. The right hand, ball bearing design in galvanized steel supports smooth, guided travel and long-term strength. With tool-less height, side, tilt, and radial adjustment ranges, the runner lets installers dial in front alignment and reveals on wooden drawers. For projects calling for a 750mm undermount runner with 5-way adjustment and soft-close performance, this Actro 5D component is a practical choice.