Hettich Actro 5D 580 mm Soft-Close Full Extension 154 lb Undermount Drawer Slide, Left Hand, Zinc, 9257110

Undermount Drawer Slide Built for Heavy Loads in Deep Frameless Casework

The Hettich Actro 5D is a 580mm soft-close, full-extension undermount slide running on ball bearings and rated 154 lb per pair — the left-hand member of a concealed runner pair sized for deep production drawers in frameless cabinets. Its 5D adjustment system lets installers fine-tune the drawer front in five directions after the box is hung, making it a strong pick for high-volume shops that need consistent front alignment across a run.

Key Features

• 154 lb per-pair capacity — puts this slide well above the standard 90 to 100 lb undermount class, handling loaded pantry and utility drawers without strain.
• Full extension — the entire drawer box travels out to the cabinet face, putting every inch of a deep 580mm drawer within reach.
• Integrated soft-close — a built-in damper catches the drawer near the end of travel and settles it shut quietly, with no add-on hardware needed.
• 5D front adjustment — five-directional fine-tuning of the drawer front through the locking devices speeds alignment on production runs and large installs.
• Ball-bearing carriage — hardened steel bearings in formed raceways deliver a smooth, precise pull under heavy loads across the full 580mm travel.
• Left-hand orientation — this is the left-hand slide only; pair it with the matching right-hand Actro 5D 580mm member to complete one working set.

Where This Slide Earns Its Place

At 580mm, this is a deep-drawer runner — suited to the long base-cabinet drawers found in kitchen pull-outs, pantry bases, and utility casework where standard 18 or 21 inch slides come up short. The 154 lb per-pair rating covers the loads that come with those applications: pots-and-pans drawers, file and archive pulls, heavy-bin inserts, and densely stocked pantry boxes. Because the slide is full extension, the full depth of a 580mm box comes out to the cabinet face — nothing stays hidden at the back. For shops building deep drawers in frameless construction, this runner fits directly into the cabinet side on the 32mm system without rear mounting brackets.

Construction and Finish

The Actro 5D is steel throughout, finished in zinc for durable indoor service. Ball bearings in full-length raceways carry the load smoothly across the entire travel — a meaningful advantage over roller-based runners when drawers are consistently loaded near rated capacity. The integrated soft-close damper is part of the slide body, so there is nothing to add or adjust for damped closing. Because this is a concealed undermount, the zinc finish is functional rather than visible: once the drawer box is seated and the front is hung, the runner disappears beneath the box.

Who Should Order This Runner

This SKU is aimed at cabinet shops and production installers building frameless casework with deep drawer boxes — specifically boxes with 1/2 to 5/8 inch sides cut to the 580mm nominal length. The 5D adjustment range is most valuable on production runs where front alignment needs to be dialed in quickly across many drawers. Homeowners building a single custom pantry base or a deep kitchen island will find the same performance here, with the ball-bearing carriage and rated capacity giving confidence on heavily loaded pulls. This runner is the left-hand member only — order lefts and rights in equal counts to keep the shop running without gaps.

A Deep-Drawer Runner That Delivers at the Weight That Matters

When the drawer is deep, the load is real, and the front alignment has to be right the first time, the Actro 5D 580mm left-hand runner gives production shops and careful builders the capacity, extension, and adjustability to finish the job cleanly.