Hettich Actro 5D 750 mm Soft-Close Full Extension 154 lb Undermount Drawer Slide, Left Hand, Zinc, 9257118

High-Capacity Concealed Runner for Deep, Heavy Drawers

The Hettich Actro 5D is a full-extension, soft-close undermount drawer slide built for serious loads and long drawer runs. This is the left-hand runner in the 750mm length, sold as a single member for production shops that stock left- and right-hand slides separately. At 154 lb per pair, it covers the demanding end of residential and light-commercial cabinet work — deep pantry drawers, wide utensil pullouts, and heavily loaded base-cabinet runs.

Key Features

• 154 lb capacity per pair — puts this slide well above the standard 90 to 100 lb undermount class, handling loaded deep drawers without strain.
• Full extension — the drawer travels the complete 750mm length, bringing the entire box out to the cabinet face for unobstructed rear access.
• Integrated soft-close — a built-in damper catches the drawer near the end of travel and settles it shut silently, every cycle.
• 5D adjustment capability — the Actro 5D system allows fine-tuning of the drawer front in five directions after installation, supporting fast alignment on large runs.
• Ball bearing carriage on steel members with zinc finish — precise, smooth travel under load with indoor corrosion resistance.
• For 1/2 to 5/8 inch (12.7 to 16mm) drawer sides — matches standard dovetailed and doweled box construction in this thickness class.

Where This Slide Earns Its Place

The 750mm length addresses a specific cabinet need: deep base cabinets and full-height pantry pullouts where a standard 18 or 21 inch slide runs out of runway before the drawer does. Paired with its right-hand mate, this runner brings the full depth of a deep drawer box out to the opening — no reaching into the back of a long cabinet. The 154 lb per pair rating means the slide handles a fully stocked spice drawer, a deep pot drawer, or a file-style base without working near its limit. For production shops building modern frameless kitchens with deeper-than-standard base cabinets, the 750mm Actro 5D is the undermount answer to that dimension.

Construction and Finish

Steel members with a zinc finish give the Actro 5D the indoor durability expected from a runner that lives beneath a drawer box and rarely sees daylight. The ball bearing carriage — rather than nylon rollers — is what makes the difference at the high end of the load range: ball bearings distribute load across hardened steel races and maintain smooth travel as the drawer weight increases. The integrated soft-close damper is part of the slide body, not a clip-on add-on, so closing behavior is consistent across the full service life of the runner.

Who This Is For

This slide is the right choice for cabinet shops and installers working on frameless European-style cabinets with drawer runs in the 750mm depth class. It suits residential kitchen and pantry work at the premium end — projects where buyers expect full access, silent closing, and a concealed runner that carries real weight. Homeowners retrofitting a single deep pantry pullout will find the same slide here that production shops run by the case. The frameless cabinet type attribute means this runner mounts directly to the cabinet side panel; face-frame installs require a different configuration.

Deep Drawers Done Right

Match the 750mm left-hand runner with its right-hand counterpart, build the box to Hettich's spec, and this slide delivers full access and silent closing to the deepest drawers on the job.